Through-bore slip rings
Hollow-centre designs that let a shaft, pipe or cables pass through the middle.
UK engineering team · Product sourcing · Supply support
Get an engineer’s recommendation for through-bore slip rings
Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Configure through-bore slip rings
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
What a through-bore slip ring is
A through-bore slip ring is a rotary electrical joint built around a hollow centre, so a drive shaft, pneumatic or hydraulic line, fibre or cable bundle can pass straight through it. The rings are mounted on an insulated sleeve that fits over or around the machine shaft, and the brush blocks sit outside them in a stationary housing. Power, signal and data circuits are combined in one unit, while the bore keeps the rotation axis available for mechanics or services. Bore sizes range from a few millimetres to hundreds of millimetres.
When to choose a through-bore slip ring
Engineers choose a through-bore design when the axis of rotation is already occupied, typically by a shaft, a rotary union or a cable that must stay continuous. It is the standard choice for indexing tables, wrapping machines and turntables built around a central column. The trade-off is that larger rings mean higher surface speed, more brush wear and more drag torque at the same rpm, and the unit is bigger than a capsule. Where axial length is the constraint rather than diameter, a pancake design may suit better.
How to specify through-bore slip rings
- Bore diameter and shaft tolerance (mm)
- Outer diameter and length limits (mm)
- Circuit count and current per circuit (A)
- Working voltage and any high-voltage isolation (V)
- Speed, continuous and peak (rpm)
- Data or bus protocols to pass, such as Ethernet, CAN or PROFINET
- Sealing (IP code), temperature (°C) and mounting method
Common mistakes
- Sizing the bore to the shaft only, with no allowance for a rotary union or cables that must also pass
- Mounting the rotor hard on a shaft with radial runout and a separate stator fixing, so the unit is forced to align two axes
- Forgetting that surface speed rises with diameter, so the rated rpm is lower for larger bores
- Not stating which circuits need screening or twisted pairs for encoder and fieldbus signals
Series compared
| Brand | Series | Circuits | Current | Speed | Bore / OD |
|---|---|---|---|---|---|
| Motion Control Products | ER Series Through Bore Slip Ring | 24 | 15 A | 300 rpm | bore up to 100 mm |
| Moog | SRA-73683 | 24 | 2 A | 250 rpm | bore up to 12.7 mm |
| Moog | SRA-73830 | 22 | 8 A | 250 rpm | bore up to 12.7 mm |
| Moog | AC6438 | 24 | 5 A | 250 rpm | bore up to 12.7 mm |
| Moog | AC6349 / AC6875 | 24 | 15 A | 250 rpm | bore up to 25.4 mm |
| Moog | AC4598 (AC6419 sealed) | 24 | 10 A | 250 rpm | bore up to 38.1 mm |
| Moog | AC6200 | 48 | 10 A | 250 rpm | bore up to 38.1 mm |
| Moog | AC6815 | 128 | 10 A | 250 rpm | bore up to 38.1 mm |
| Moog | AC6428 | 96 | 2 A | 250 rpm | bore up to 34.9 mm |
| Moog | AC6429 | 60 | 10 A | 250 rpm | bore up to 34.9 mm |
| Moog | AC6275 (AC6793 sealed) | 144 | 50 A | 1000 rpm | bore up to 69.9 mm |
| Moog | AC6098 | 72 | 50 A | 250 rpm | bore up to 101.6 mm |
| Moog | AC7296 | 72 | 25 A | 500 rpm | bore up to 25.4 mm |
| Moog | Endura-Trac Standard W Series | 36 | 30 A | 60 rpm | bore up to 76.2 mm |
| Moog | Endura-Trac Fiber W Series | 76 | 30 A | 250 rpm | bore up to 228.6 mm |
| Moog | Flow Pack F 7270 | — | 20 A | 500 rpm | bore up to 25.4 mm |
| Moog | F 7154 B | 5 | 12 A | 20 rpm | bore up to 50 mm |
| Servotecnica | SVTS C (C 01-C 11) | 96 | 20 A | 500 rpm | bore up to 100 mm |
| Kübler | SR085 | — | 25 A | 800 rpm | bore up to 30 mm |
| MOFLON | MT Series through-bore slip rings | 144 | — | — | bore up to 300 mm |
| Senring | H Series through-hole slip rings | 144 | 20 A | — | bore up to 300 mm |
| Deublin | Through-bore slip rings | — | — | — | bore up to 300 mm |
| Morgan Advanced Materials | Wind turbine generator slip ring assemblies | — | — | — | OD up to 450 mm |
| Rotary Systems | Through-bore capsules and sealed rings (SR013–SR018) | — | 10 A | 600 rpm | bore up to 38.1 mm |
| Meridian Laboratory | ROTOCON MXT series (through-bore) | 40 | 35 A | — | bore up to 101.6 mm |
| Fabricast | Self-contained through-bore slip rings | 24 | 10 A | 10000 rpm | bore up to 50.8 mm |
Maximum figures across each series, summarised from manufacturers' published data on the date shown on each series page. Always confirm against the current datasheet.
Where through-bore slip rings are used
Through-bore slip rings: frequently asked questions
How do I choose the bore size for a through-bore slip ring?
Start with the shaft diameter and its tolerance, then add anything else that must pass through the centre, such as hoses, a rotary union stem or a fibre. Allow clearance for assembly and for the insulating sleeve. Larger bores raise surface speed, cost and drag torque, so pick the smallest bore that genuinely clears what has to pass through.
Can a through-bore slip ring carry Ethernet as well as power?
Yes. Many through-bore units combine power rings with signal rings designed for industrial Ethernet, using controlled impedance, twisted-pair routing and screening between groups. State the protocol and speed, typically 100 Mbit/s or gigabit, so the supplier can allocate suitable rings and keep them away from motor power. For very high data rates, a contactless or fibre channel may be added.
Engineer support
Get your products sourced with UK engineering support
Tell us the part or application, quantity and timing. We connect your requirement with experienced UK engineering and procurement support for product selection, sourcing and pricing. Delivery and after-sales arrangements are confirmed by your chosen provider.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.