Skip to content

Through-bore slip rings

Moog Flow Pack F 7270

Small through-bore slip ring sized for flow-pack packaging machines, carrying 20 A power lines and low-current data lines at up to 500 rpm.

Key specifications

Current per circuit (max)20 A
Voltage (max)230 V
Speed (max)500 rpm
Bore25.4–25.4 mm
Outer diameter60–60 mm

Summarised in our own words from Moog Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2

Notes on this data

Power 2 x 20 A + PE at 230 V; data 2 x 2 A at 24 V. Size 60 x 110 mm.

Specify Motion is not affiliated with Moog Inc.. Moog and Flow Pack F 7270 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.

Typical applications

Packaging machines & rotary indexing tables Flow-pack packaging machines

Alternatives that meet or exceed these figures

Engineers often come to us with a Moog part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.

Meets or exceeds on 2 of 4 figures

Through-bore slip rings with a hollow centre so shafts, pipes or cables can pass through, carrying power, signal and fieldbus data. Standard bores run from 12.7 mm to 100 mm and custom bores are offered.

Published maximumFlow Pack F 7270ER Series Through Bore Slip Ring
Circuits—24
Current per circuit20 A15 A
Speed500 rpm300 rpm
Voltage230 V380 V meets or exceeds
Bore25.4 mm100 mm meets or exceeds
View ER Series Through Bore Slip Ring →

Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.

Other through-bore slip rings series

Spec builder

Specify what you need instead of Flow Pack F 7270

Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.

  1. 1Products
  2. 2Performance
  3. 3Environment
  4. 4Volumes
  5. 5Your spec
Step 1 of 5

Engineer support

Let our experienced engineers do the hard work for you

Tell us how you use the Moog Flow Pack F 7270: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.

  • Reviewed by an engineer, not an autoresponder
  • Like-for-like and better-fit alternatives
  • Standard, modified and custom options

Prefer to configure it? Use the spec builder.

We use your details to answer this enquiry and share them with the specialist engineering and supply partner best placed to fulfil it. See our privacy notice.

Ask an engineer