Harmonic actuator
MAT harmonic actuator
Large-bore version of the harmonic actuator with a frameless 16-pole motor, giving a much bigger through-hole for cabling. Two sizes.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Motion Control Products parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Configure MAT
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Bore | 26–45 mm |
|---|---|
| Ingress protection | IP65 default, IP67 optional |
| Rated torque (max) | 557 Nm |
| Peak torque (max) | 800 Nm |
| Speed (max) | 102 rpm |
| Ratio | 51–161:1 |
| Sizes | 25, 40 |
| Resolution (max) | 24 bit |
| Accuracy | 30-40 arc-sec uni-directional; repeatability 7-8 arc-sec |
| Mass (max) | 11.7 kg |
| Encoder | Nikon absolute 24-bit ST / 16-bit MT; BiSS-C absolute 19-bit ST / 16-bit MT; incremental |
| Supply | 48 VDC, 110 VAC, 220 VAC, 380/480 VAC optional |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Options
- holding brake
- IP67
- rear or side cable exit
- Nikon / BiSS-C / incremental encoder
- 380/480 VAC
Typical applications
What a harmonic actuator is
A harmonic actuator is a rotary servo actuator that combines a strain-wave gear, a servo motor, a position encoder and often a brake in one compact housing. Many have a hollow shaft for cables, and some include the servo drive with a fieldbus interface. The strain-wave gear gives a high ratio with near-zero backlash, while a precision output bearing carries the load directly. The actuator is ready to mount as a robot joint or precision rotary axis.
When engineers choose a harmonic actuator
Choose a harmonic actuator for robot joints, positioners and precision rotary axes where compact size, zero backlash and fast integration matter. It saves the design effort of combining motor, gear, encoder and bearings. The trade-offs are cost and flexibility: the motor, gear ratio and feedback are fixed by the range, and torque limits are set by the strain-wave gear. For heavy shock loads, a cycloidal solution may be more robust.
How to specify the MAT
Send these with your enquiry and an engineer can confirm the right MAT variant:
- Rated and peak output torque (Nm)
- Output speed (rpm)
- Ratio (:1)
- Hollow shaft diameter (mm)
- Feedback: motor-side and output-side encoders
- Brake and integrated drive options
- Supply voltage and interface
Common mistakes to avoid
- Exceeding momentary torque in a collision
- Ignoring output bearing moment load
- Mismatching drive and encoder interface
- Forgetting heat in continuous duty
MAT: frequently asked questions
Can you help replace MAT or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the MAT?
Large-bore version of the harmonic actuator with a frameless 16-pole motor, giving a much bigger through-hole for cabling. Two sizes. Published series figures include bore 26 mm, bore 45 mm, rated torque 557 Nm, peak torque 800 Nm. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the MAT?
The MAT is part of a range available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the bore of the MAT?
The published series minimum bore is 26 mm. Individual models and sizes in the MAT range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
What is the benefit of dual encoders on a harmonic actuator?
A motor-side encoder controls the motor, while an output-side encoder measures the joint position directly after the gear. This compensates for gear deflection and gives true absolute output position at power-up. Dual encoders improve accuracy and support safety and collision detection.
Can a harmonic actuator include its own drive?
Yes, some versions integrate the servo drive and communicate over EtherCAT, CANopen or similar networks. This reduces cabinet space and wiring. Other versions connect to a separate servo drive. Choose by machine architecture, cabinet space and the safety functions needed, such as safe torque off or functional safety over the network.
Further reading: How to select a harmonic actuator · Harmonic vs planetary vs cycloidal · Gearboxes and harmonic drives
Often compared with
Engineers specifying this series often compare it with:
Other harmonic actuator series
Engineer support
Need MAT or a complete system around it?
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.