Strain-wave (harmonic) gear
Laifual Drive FSG (FS high-torque) strain-wave (harmonic) gear
High-torque cup-type strain-wave gear, sizes 14 to 40 and ratios 50–160, rated up to 382 Nm with 841 Nm start/stop peak and 1,510 Nm momentary (size 40), backlash 20 arcsec or less; listed as the CSG-equivalent type.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Laifual Drive parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of FSG (FS high-torque)
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Rated torque | 7–382 Nm |
|---|---|
| Peak torque (max) | 841 Nm |
| Ratio | 50–160:1 |
| Backlash (max) | 0.33 arcmin |
| Sizes | 14, 17, 20, 25, 32, 40 |
| Rated life | 15,000 h |
| Momentary torque max | 1,510 |
| Max input | 8,500 |
| Backlash | ≤20 arcsec |
| Structure | cup-type flexspline |
Summarised in our own words from Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Size 14 row carries an FSS label on the page; confirm. Life 10,000 h at ratio 50, 15,000 h at 80 and above.
Specify Motion is not affiliated with Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952). Laifual Drive and FSG (FS high-torque) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Laifual Drive FSG (FS high-torque) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Laifual Drive part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Ultra-flat cup-type strain-wave gear with a very short axial length, light weight and high stiffness for its size.
| Published maximum | FSG (FS high-torque) | LCD |
|---|---|---|
| Rated torque | 382 Nm | — |
| Peak torque | 841 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0.33 arcmin | — |
Cup-type strain-wave gear component sets for building your own joint; the LCSG high-torque version lifts capacity by around 30% over the standard LCS.
| Published maximum | FSG (FS high-torque) | LCS / LCSG |
|---|---|---|
| Rated torque | 382 Nm | — |
| Peak torque | 841 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0.33 arcmin | — |
Ultra-flat hollow-shaft strain-wave gear, combining a very low axial height with a through-bore for wiring.
| Published maximum | FSG (FS high-torque) | LHD |
|---|---|---|
| Rated torque | 382 Nm | — |
| Peak torque | 841 Nm | — |
| Ratio (max) | 160:1 | 500:1 meets or exceeds |
| Backlash (lower is better) | 0.33 arcmin | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a strain-wave (harmonic) gear is
A strain-wave gear, often called a harmonic gear, reduces speed using three parts: an elliptical wave generator, a thin flexible toothed cup or hat called the flexspline, and a rigid circular spline with internal teeth. The wave generator deforms the flexspline so its teeth engage the circular spline at two points. Because the flexspline has typically two fewer teeth, each input turn advances it slightly, giving ratios of about 30:1 to 160:1 in one stage, with near-zero backlash.
When engineers choose a strain-wave (harmonic) gear
Choose a strain-wave gear for compact, lightweight, high-ratio reduction with near-zero backlash, such as robot joints, cobots, medical robots, aerospace and optics. Hollow versions allow cables through the centre. The trade-offs are torsional stiffness at low load, which is lower than some alternatives, limited input speed and the risk of tooth ratcheting under overload. For shock loads and heavy base joints, cycloidal reducers are often preferred.
How to specify the Laifual Drive FSG (FS high-torque)
Send these with your enquiry and an engineer can confirm the right FSG (FS high-torque) variant or an equivalent:
- Ratio (:1)
- Rated, peak and momentary torque (Nm)
- Input speed limits (rpm)
- Torsional stiffness (Nm/arcmin)
- Hysteresis and accuracy (arcmin)
- Component set or housed unit
- Hollow shaft diameter and output bearing loads
Common mistakes to avoid
- Exceeding momentary torque and ratcheting the teeth
- Ignoring low-load stiffness in precision control
- Poor housing tolerances for component sets
- Using the wrong lubricant or quantity
Laifual Drive FSG (FS high-torque): frequently asked questions
Can you help replace Laifual Drive FSG (FS high-torque) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Laifual Drive FSG (FS high-torque)?
High-torque cup-type strain-wave gear, sizes 14 to 40 and ratios 50–160, rated up to 382 Nm with 841 Nm start/stop peak and 1,510 Nm momentary (size 40), backlash 20 arcsec or less; listed as the CSG-equivalent type. Published series figures include rated torque 7 Nm, rated torque 382 Nm, peak torque 841 Nm, ratio 50:1. It is made by Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952); Specify Motion can help source it or propose an equivalent.
Who makes the Laifual Drive FSG (FS high-torque)?
The Laifual Drive FSG (FS high-torque) is made by Laifual Drive (Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Zhejiang Laifual Harmonic Drive Co., Ltd. (HKEX: 03952); brand names are used only to identify the product.
What is the rated torque of the Laifual Drive FSG (FS high-torque)?
The published series minimum rated torque is 7 Nm. Individual models and sizes in the FSG (FS high-torque) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Laifual Drive FSG (FS high-torque)?
We can assess suitable replacement options. On published figures, LeaderDrive LCD and LeaderDrive LCS / LCSG are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Why do strain-wave gears have near-zero backlash?
The flexspline teeth are preloaded into the circular spline teeth by the elliptical wave generator, and many teeth engage at once. There is no clearance between teeth at the engagement zones, so backlash is close to zero. Lost motion comes mainly from elastic deflection.
What is the difference between a strain-wave component set and a housed unit?
A component set is the wave generator, flexspline and circular spline, which the machine builder mounts in its own housing with bearings. A housed unit adds a housing, output bearing and seals. Component sets save weight and space; housed units are easier to integrate.
Further reading: Harmonic vs planetary vs cycloidal · How to select a gearbox · Gearboxes and harmonic drives
Other strain-wave (harmonic) gear series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Laifual Drive FSG (FS high-torque): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.