Magnetic rotary encoder
Renishaw RLS RM08 magnetic rotary encoder
Very small non-contact rotary magnetic encoder for end-of-shaft mounting. Provides absolute or incremental output in an 8 mm body.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Renishaw parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of RLS RM08
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Outer diameter | 8–8 mm |
|---|---|
| Resolution (max) | 12 bit |
| Accuracy | ±0.3° |
Summarised in our own words from Renishaw plc's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
Presented on renishaw.com magnetic encoders page as an RLS product; figures from rls.si. Max 30,000 rpm. od_mm = body diameter.
Specify Motion is not affiliated with Renishaw plc. Renishaw and RLS RM08 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Renishaw RLS RM08 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Renishaw part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Open PCB-style absolute head (IP00) at 18-20 bit for integration into OEM assemblies.
| Published maximum | RLS RM08 | AKP18 |
|---|---|---|
| Resolution | 12 bit | 20 bit meets or exceeds |
Absolute magnetic sensing head for linear and rotary scales, with a multi-turn MT variant; tiny FFC or Molex packages.
| Published maximum | RLS RM08 | AKS16 / AKS16-MT |
|---|---|---|
| Resolution | 12 bit | 20 bit meets or exceeds |
Highest-resolution Bogen absolute head, 21 to 24 bit, for linear and rotary scales.
| Published maximum | RLS RM08 | AKS17 |
|---|---|---|
| Resolution | 12 bit | 24 bit meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a magnetic rotary encoder is
A magnetic rotary encoder measures angle by sensing the field of a magnet with Hall-effect or magnetoresistive sensors. On-axis designs place a diametrically magnetised magnet on the shaft end above a sensor chip; off-axis designs read a multi-pole magnetic ring around a hollow shaft. Signal processing turns the field into absolute or incremental position. Because there is no optical path, magnetic encoders tolerate dust, oil, moisture and vibration, typically with moderate resolution and accuracy at low cost.
When engineers choose a magnetic rotary encoder
Choose a magnetic rotary encoder for robust, compact feedback in harsh or cost-sensitive applications, such as motors, AGVs, robotics, agricultural and mobile machinery. Off-axis rings suit hollow joints. The trade-offs are accuracy and magnetic interference: accuracy is typically lower than optical, and strong stray fields from brakes or motors can affect the reading. For high precision, choose optical. Consider shielding and mounting tolerances carefully.
How to specify the Renishaw RLS RM08
Send these with your enquiry and an engineer can confirm the right RLS RM08 variant or an equivalent:
- Resolution (bits or counts)
- Accuracy (degrees or arcmin)
- Absolute or incremental output
- On-axis or off-axis ring mounting
- Interface: SSI, BiSS, SPI, PWM or analogue
- Mounting tolerances: gap and runout (mm)
- Environment and IP code
Common mistakes to avoid
- Mounting near brakes or motor magnets without shielding
- Exceeding the allowed air gap or runout
- Expecting optical accuracy from a magnetic encoder
- Overlooking calibration after installation
Renishaw RLS RM08: frequently asked questions
Can you help replace Renishaw RLS RM08 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Renishaw RLS RM08?
Very small non-contact rotary magnetic encoder for end-of-shaft mounting. Provides absolute or incremental output in an 8 mm body. Published series figures include outer diameter 8 mm, outer diameter 8 mm, resolution 12 bit. It is made by Renishaw plc; Specify Motion can help source it or propose an equivalent.
Who makes the Renishaw RLS RM08?
The Renishaw RLS RM08 is made by Renishaw (Renishaw plc) and is listed here for engineers comparing options. Specify Motion is not affiliated with Renishaw plc; brand names are used only to identify the product.
What is the outer diameter of the Renishaw RLS RM08?
The published series minimum outer diameter is 8 mm. Individual models and sizes in the RLS RM08 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Renishaw RLS RM08?
We can assess suitable replacement options. On published figures, Bogen AKP18 and Bogen AKS16 / AKS16-MT are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Are magnetic encoders as accurate as optical encoders?
Typically not. Magnetic encoders tolerate contamination and vibration well but usually have lower accuracy and resolution than optical encoders of similar size. Self-calibration and good mounting can improve results. For high-precision positioning and metrology, optical encoders remain the usual choice, while magnetic types win on robustness and cost.
What is the difference between on-axis and off-axis magnetic encoders?
On-axis encoders read a single magnet on the end of a shaft, which is simple and compact. Off-axis encoders read a magnetic ring around a shaft, which leaves the centre free for hollow shafts or cables. Off-axis designs are more sensitive to mounting tolerances.
Further reading: Magnetic vs capacitive vs optical encoders · How to select an encoder · Encoders and feedback
Other magnetic rotary encoder series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Renishaw RLS RM08: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.