Planetary gearbox
APEX Dynamics GL / GLS planetary gearbox
Apex Dynamics AGV planetary with a rotating housing so a drive wheel or pulley can mount directly over it; GLS takes shaft input for belt drive.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need APEX Dynamics parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Configure APEX Dynamics GL / GLS
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP65 |
|---|---|
| Speed (max) | 7,000 rpm |
| Ratio | 2–90:1 |
| Backlash (max) | 3 arcmin |
| Sizes | 082, 100, 132 |
| Efficiency | >=97% 1-stage, >=94% 2-stage |
| Radial load (max) | 7,200 N |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
APEX Dynamics GL / GLS replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original APEX Dynamics part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
High-rigidity Wanshsin inline planetary with three backlash classes down to super-precision, for machine tools, automation and AGVs.
| Published maximum | GL / GLS | WSH |
|---|---|---|
| Rated torque | — | 2,400 Nm |
| Peak torque | — | 7,200 Nm |
| Ratio (max) | 90:1 | 100:1 meets or exceeds |
| Backlash (lower is better) | 3 arcmin | 1.5 arcmin meets or exceeds |
Wanshsin inline planetary designed for high radial loads, offered in three precision classes.
| Published maximum | GL / GLS | WTH |
|---|---|---|
| Rated torque | — | 2,050 Nm |
| Peak torque | — | 6,150 Nm |
| Ratio (max) | 90:1 | 100:1 meets or exceeds |
| Backlash (lower is better) | 3 arcmin | 1.5 arcmin meets or exceeds |
High-precision round-flange planetary with high input speed capability and near-zero backlash, aimed at robotics and CNC.
| Published maximum | GL / GLS | WAE |
|---|---|---|
| Ratio (max) | 90:1 | — |
| Backlash (lower is better) | 3 arcmin | 2 arcmin meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
APEX Dynamics GL / GLS model codes
Published model codes in the GL / GLS range. Search this page for your part number, or send it to us for availability, pricing and lead time.
| Model code | Pricing / replacement |
|---|---|
| GL082 | Quote or replacement for GL082 → |
| GL100 | Quote or replacement for GL100 → |
| GL132 | Quote or replacement for GL132 → |
| GLS082 | Quote or replacement for GLS082 → |
| GLS100 | Quote or replacement for GLS100 → |
| GLS132 | Quote or replacement for GLS132 → |
Options
- GL hub input
- GLS shaft input for belt/pulley
Typical applications
What a planetary gearbox is
A planetary gearbox reduces speed and multiplies torque using a central sun gear driven by the motor, several planet gears on a carrier, and an outer ring gear. Load is shared between the planets, so the gearbox is compact, coaxial and torque-dense. A single stage typically gives ratios of about 3:1 to 10:1, and stages are combined for higher ratios. Precision servo planetaries use ground helical or spur gears, preloaded output bearings and a motor adapter flange, with backlash typically a few arcminutes or less.
When engineers choose a planetary gearbox
Choose a planetary gearbox for most servo and stepper axes that need more torque, lower reflected inertia or a better inertia match. It is efficient, typically above 95% per stage, stiff and widely available in standard frames. The trade-offs are backlash, which is low but not zero, and limited single-stage ratio. For zero backlash in a compact joint, a strain-wave gear suits better. For very high shock loads, a cycloidal reducer may be more robust.
How to specify the APEX Dynamics GL / GLS
Send these with your enquiry and an engineer can confirm the right GL / GLS variant:
- Ratio and output speed (:1, rpm)
- Nominal and peak output torque (Nm)
- Emergency stop torque (Nm)
- Backlash (arcmin) and torsional stiffness (Nm/arcmin)
- Radial and axial output loads (N)
- Motor flange, shaft diameter and length (mm)
- Duty cycle, mounting orientation and lubrication
Common mistakes to avoid
- Sizing on motor torque times ratio without checking acceleration torque and service factors
- Ignoring the input speed limit at high motor speeds
- Mounting a pulley or pinion that overloads the output bearing
- Forgetting the gearbox efficiency and heat in continuous duty
APEX Dynamics GL / GLS: frequently asked questions
Can you help replace APEX Dynamics GL / GLS or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the APEX Dynamics GL / GLS?
Apex Dynamics AGV planetary with a rotating housing so a drive wheel or pulley can mount directly over it; GLS takes shaft input for belt drive. Published series figures include speed 7,000 rpm, ratio 2:1, ratio 90:1, backlash 3 arcmin. It is available through our supply network, and our engineers can confirm the right variant for your application.
What model codes are in the APEX Dynamics GL / GLS range?
The GL / GLS range includes GL082, GL100, GL132, GLS082, GLS100, GLS132. The table on this page lists each published model code with its key figures. Send us the code you use, or the one you need to replace, and our engineers will confirm availability, lead time or the closest equivalent.
Who makes the APEX Dynamics GL / GLS?
The APEX Dynamics GL / GLS is made by APEX Dynamics (APEX Dynamics, Inc.) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the speed of the APEX Dynamics GL / GLS?
The published series maximum speed is 7,000 rpm. Individual models and sizes in the GL / GLS range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the APEX Dynamics GL / GLS?
We can assess suitable replacement options. On published figures, Wanshsin WSH and Wanshsin WTH are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
How do I choose a planetary gearbox ratio?
Start from the load speed and motor speed range, then check inertia matching and torque. A ratio that brings the reflected load inertia close to the motor inertia improves dynamics. Then confirm peak output torque during acceleration is within the gearbox rating and that input speed stays under the limit.
What backlash does a precision planetary gearbox have?
Precision servo planetary gearboxes typically have backlash from below one arcminute to several arcminutes, depending on grade and stages. Lower backlash costs more. For most positioning axes, a few arcminutes is fine; for robot joints or optics, strain-wave or zero-backlash designs are used.
Further reading: How to select a planetary gearbox · Harmonic vs planetary vs cycloidal · Gearboxes and harmonic drives
Often compared with
Engineers specifying this series often compare it with:
Other planetary gearbox series
Engineer support
Need APEX Dynamics GL / GLS or a complete system around it?
Tell us the part or application, quantity and timing. We connect your requirement with experienced UK engineering and procurement support for product selection, sourcing and pricing. Delivery and after-sales arrangements are confirmed by your chosen provider.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.