DC servo motor
maxon EC-i DC servo motor
Slotted iron-core brushless DC motors with internal rotor, built for high torque and dynamics at low voltage in 30-70 mm diameters.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need maxon parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of EC-i
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Outer diameter | 30–70 mm |
|---|---|
| Continuous torque (max) | 2.36 Nm |
| Power (max) | 800 W |
| Voltage | 12-60 V windings |
Summarised in our own words from maxon group (maxon motor ag)'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
Sizes EC-i 30, 40, 52, 70. EC-i 70 (800 W) nominal torque ~2,250 mNm (48 V) / ~2,360 mNm (60 V), values marked provisional. EC-i 30: 30 W, ~37 mNm, 15,000 rpm. EC-i 70 page shows speeds of ~21,600-22,900 rpm that look like no-load speeds rather than max permissible speed, so speed_rpm_max left out. Classified servo-motors/dc-servo (low-voltage BLDC).
Specify Motion is not affiliated with maxon group (maxon motor ag). maxon and EC-i are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
maxon EC-i replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original maxon part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Low-voltage (24-48 VDC) brushless servo motors with a 12-slot/10-pole low-cogging design, IP65 and a choice of optical or magnetic, incremental or absolute encoders. Matched to Kinco FD1 and OD drives for battery-powered and mobile machines.
| Published maximum | EC-i | SMC Series Low-Voltage DC Servo Motors |
|---|---|---|
| Power | 800 W | 3,000 W meets or exceeds |
A single 110 mm, 1.2 kW, 48 VDC servo motor giving 4 Nm at 3000 rpm for higher-power low-voltage systems, paired with Kinco FD1 and OD drives.
| Published maximum | EC-i | SMH Series Low-Voltage DC Servo Motor … |
|---|---|---|
| Rated torque | — | 4 Nm |
| Power | 800 W | 1,200 W meets or exceeds |
Low-voltage brushless DC servo motors for 48 or 96 VDC systems, with a 12-slot/10-pole design, matched to the Kinco FD1X5 drive and aimed at robotics, CNC and automated lines.
| Published maximum | EC-i | SMK Series Low-Voltage DC Servo Motors |
|---|---|---|
| Power | 800 W | 5,000 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a DC servo motor is
A DC servo motor, in current usage, is usually a low-voltage brushless permanent-magnet motor designed to run from a DC bus, typically 24 to 96 V, under closed-loop servo control. Electronically it works like an AC servo, with a three-phase stator commutated by the drive and encoder or Hall feedback on the shaft. The lower voltage means higher current for the same power, but suits battery-powered and safety-extra-low-voltage machines. Small precision brushless servomotors also fall into this group.
When engineers choose a DC servo motor
Choose a low-voltage DC servo for mobile robots, AGVs, battery equipment, medical devices and compact machines where mains voltage is impractical or unsafe. It allows simple power distribution and safe access. The trade-offs are current and power range: high current means thicker cables and higher losses, so power is typically limited to a few kilowatts. For mains-powered machines above that, an AC servo is usually simpler.
How to specify the maxon EC-i
Send these with your enquiry and an engineer can confirm the right EC-i variant or an equivalent:
- Bus voltage (V DC) and battery range
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Continuous and peak current (A)
- Feedback type and resolution
- Brake, IP code and frame size (mm)
- Drive and network interface
Common mistakes to avoid
- Sizing at nominal battery voltage without checking the low-charge end
- Undersizing cables for the higher current
- Ignoring regenerative energy into a battery or supply
- Mixing motor and drive feedback types that are not compatible
maxon EC-i: frequently asked questions
Can you help replace maxon EC-i or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the maxon EC-i?
Slotted iron-core brushless DC motors with internal rotor, built for high torque and dynamics at low voltage in 30-70 mm diameters. Published series figures include outer diameter 30 mm, outer diameter 70 mm, continuous torque 2.36 Nm, power 800 W. It is made by maxon group (maxon motor ag); Specify Motion can help source it or propose an equivalent.
Who makes the maxon EC-i?
The maxon EC-i is made by maxon (maxon group (maxon motor ag)) and is listed here for engineers comparing options. Specify Motion is not affiliated with maxon group (maxon motor ag); brand names are used only to identify the product.
What is the outer diameter of the maxon EC-i?
The published series minimum outer diameter is 30 mm. Individual models and sizes in the EC-i range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the maxon EC-i?
We can assess suitable replacement options. On published figures, Kinco SMC Series Low-Voltage DC Servo Motors and Kinco SMH Series Low-Voltage DC Servo Motor (SMH110D) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between an AC servo and a DC servo motor?
Both are typically brushless permanent-magnet motors under closed-loop control. The main difference is the supply: AC servos are wound for drives fed from mains voltage, while DC servos are wound for low-voltage DC buses. DC servos suit battery and low-voltage machines; AC servos suit higher-power mains machines.
How does battery voltage affect a DC servo motor?
Motor speed is roughly proportional to available voltage, so as a battery discharges the top speed falls. Size the motor at the lowest working battery voltage. Also allow for regenerative energy during braking, which raises bus voltage and must be absorbed by the battery or a braking circuit.
Further reading: How to select a servo motor · How to select a dc motor · Servo and stepper motors
Other dc servo motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the maxon EC-i: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.