Roller screw actuator
Exlar FTP Series (press actuator)
Oil-lubricated planetary roller-screw actuator optimised for pressing, with extension force ratings up to around 356 kN and rated life quoted in press cycles.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Exlar parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of FTP Series (press actuator)
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Force (max) | 355,800 N |
|---|---|
| Stroke (max) | 900 mm |
| Linear speed (max) | 401 mm/s |
| Screw lead | 12 |
| Screw type | planetary roller screw |
| Sizes | FTP160 (160 mm): 200 kN extension / 89 kN retraction; strokes 150, 300, 600, 900 mm; 401 mm/s; min life 3 million press cycles at max force, FTP215 (215 mm): 355.8 kN extension / 177.9 kN retraction; strokes 150, 300, 600 mm; 351 mm/s; min life 1.6 million press cycles at max force |
Summarised in our own words from Curtiss-Wright Actuation Group's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Metric as printed (overview rounds FTP215 to 355 kN / 40 tf). force_N_max is extension force; retraction max is lower (89 kN / 177.9 kN). Page labels it 'max continuous force' but defines it as maximum routinely applied force. IP rating, temperature and duty not published for FTP. 2026 FTP catalog PDF linked but not separately read.
Specify Motion is not affiliated with Curtiss-Wright Actuation Group. Exlar and FTP Series (press actuator) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Exlar FTP Series (press actuator) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Exlar part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
High-force planetary roller-screw (and ball-screw) rod actuator from 89 kN (RSX10) up to 445 kN (100,000 lbf, RSX50) series maximum, positioned as a direct hydraulic cylinder replacement, with oil-cooled and food-grade versions.
| Published maximum | FTP Series (press actuator) | RSX Extreme Force |
|---|---|---|
| Force | 355,800 N | 445,000 N meets or exceeds |
| Stroke | 900 mm | 1,500 mm meets or exceeds |
| Speed | 401 mm/s | 760 mm/s meets or exceeds |
Compact C7 ballscrew linear module with built-in guide, matched to 100-400 W servo motors from the main Japanese and Taiwanese brands.
| Published maximum | FTP Series (press actuator) | BLM Built-in Linear Module |
|---|---|---|
| Force | 355,800 N | — |
| Stroke | 900 mm | 1,250 mm meets or exceeds |
| Speed | 401 mm/s | 1,600 mm/s meets or exceeds |
Steel-belt driven linear module with integral guide rail, intended as a long-stroke, high-speed replacement for pneumatic cylinders.
| Published maximum | FTP Series (press actuator) | LB Belt-Drive Linear Actuator |
|---|---|---|
| Force | 355,800 N | — |
| Stroke | 900 mm | 3,050 mm meets or exceeds |
| Speed | 401 mm/s | 2,000 mm/s meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a roller screw actuator is
A roller screw actuator is a rod actuator driven by a planetary roller screw instead of a ball screw. Threaded rollers sit between the screw and nut, so the load is spread across many line contacts rather than a limited number of balls. This gives much higher load capacity, stiffness and shock resistance in the same envelope, and typically several times the life of a ball screw of similar size. Inverted designs place the rollers on the rod, allowing the motor rotor to drive the nut directly.
When engineers choose a roller screw actuator
Choose a roller screw actuator for high forces, long life, heavy duty cycles or shock loads, such as presses, welding guns, test rigs and hydraulic replacement. The trade-offs are cost, which is higher than an equivalent ball screw, and lower efficiency at very fine leads. For moderate loads and duty, a ball screw is usually more economical. Roller screws also tolerate higher accelerations and speeds at a given diameter, which helps compact high-force designs.
How to specify the Exlar FTP Series (press actuator)
Send these with your enquiry and an engineer can confirm the right FTP Series (press actuator) variant or an equivalent:
- Peak and continuous force (N or kN)
- Full motion profile with dwell times
- Required life (km or cycles)
- Stroke (mm) and speed (mm/s)
- Shock or impact loads
- Mounting and side-load conditions
- Lubrication method and environment
Common mistakes to avoid
- Choosing a roller screw when duty and load would let a ball screw do the job
- Neglecting lubrication interval, which strongly affects roller screw life
- Calculating life on peak force instead of the cubic mean load
- Forgetting that motor and drive must also handle the peak force
Exlar FTP Series (press actuator): frequently asked questions
Can you help replace Exlar FTP Series (press actuator) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Exlar FTP Series (press actuator)?
Oil-lubricated planetary roller-screw actuator optimised for pressing, with extension force ratings up to around 356 kN and rated life quoted in press cycles. Published series figures include force 355,800 N, stroke 900 mm, linear speed 401 mm/s. It is made by Curtiss-Wright Actuation Group; Specify Motion can help source it or propose an equivalent.
Who makes the Exlar FTP Series (press actuator)?
The Exlar FTP Series (press actuator) is made by Exlar (Curtiss-Wright Actuation Group) and is listed here for engineers comparing options. Specify Motion is not affiliated with Curtiss-Wright Actuation Group; brand names are used only to identify the product.
What is the force of the Exlar FTP Series (press actuator)?
The published series maximum force is 355,800 N. Individual models and sizes in the FTP Series (press actuator) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Exlar FTP Series (press actuator)?
We can assess suitable replacement options. On published figures, Tolomatic RSX Extreme Force and Motion Control Products BLM Built-in Linear Module are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Why are roller screws longer lasting than ball screws?
In a planetary roller screw, the load is carried across many line contacts on the threaded rollers, while a ball screw carries load through point contacts on a limited number of balls. Lower contact stress per point gives more load capacity and a longer fatigue life for the same size, typically several times longer at the same load.
When is a ball screw a better choice than a roller screw?
A ball screw is usually better value for moderate loads, normal duty and modest life targets, and it is more widely available in standard sizes and leads. Choose a roller screw when force, shock, stiffness or life requirements push a ball screw beyond a sensible size. Calculating life with the real cycle usually shows which applies.
Further reading: Ball screw vs roller screw · Hydraulic to electric actuator · Linear actuators
Other roller screw actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Exlar FTP Series (press actuator): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.