Rod actuatorLegacy
Thomson Electrak 10 rod actuator
Older general-purpose DC rod actuator offered with acme or ball screw up to 6.8 kN; Thomson now files it under legacy products.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Thomson lists this series as legacy. We can help with spares for installed machines, a migration to the replacement, or an alternative. Find a replacement.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need Thomson parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of Electrak 10
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP65 optional |
|---|---|
| Temperature | -25–65 °C |
| Force (max) | 6,800 N |
| Stroke (max) | 610 mm |
| Linear speed (max) | 61 mm/s |
| Screw type | acme or ball |
| Supply | 12, 24, 36 Vdc |
| Duty | 25% at full load, 25 C |
| Sizes | Acme screw: 2,250 N dynamic / 11,350 N static; 54 mm/s no load, Ball screw: 6,800 N dynamic / 18,000 N static; 61 mm/s no load |
Summarised in our own words from Regal Rexnord's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
Metric as printed. Status inferred from the page sitting under Thomson's /legacy/ section; page itself does not state status or replacement. Standard IP rating not stated. Applications not listed on page; entry is generic.
Specify Motion is not affiliated with Regal Rexnord. Thomson and Electrak 10 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Thomson Electrak 10 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Thomson part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Ball-screw servo electric cylinder in seven frame sizes from 32 to 150, with inline or reverse-parallel motor mounting and optional force sensing, aimed at hydraulic and pneumatic replacement.
| Published maximum | Electrak 10 | SRB Linear Servo Actuator |
|---|---|---|
| Force | 6,800 N | 49,033 N meets or exceeds |
| Stroke | 610 mm | 1,000 mm meets or exceeds |
| Speed | 61 mm/s | 1,250 mm/s meets or exceeds |
General-purpose electric rod actuator in six sizes with solid, bronze or ball screws and inline or reverse-parallel motor mounting; a broad pneumatic/hydraulic replacement workhorse.
| Published maximum | Electrak 10 | RSA-ST (standard thrust) |
|---|---|---|
| Force | 6,800 N | 17,917 N meets or exceeds |
| Stroke | 610 mm | 1,524 mm meets or exceeds |
| Speed | 61 mm/s | 3,124 mm/s meets or exceeds |
Screw-driven rodless actuator with recirculating ball-bearing guidance integral to the extrusion, so it carries loads up to 35.6 kN (with carrier options) without external guides.
| Published maximum | Electrak 10 | B3S Screw-Drive Rodless |
|---|---|---|
| Force | 6,800 N | 12,010 N meets or exceeds |
| Stroke | 610 mm | 4,547 mm meets or exceeds |
| Speed | 61 mm/s | 1,524 mm/s meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a rod actuator is
A rod actuator, sometimes called an electric cylinder, converts motor rotation into linear thrust through a screw and nut inside a tube, pushing a rod in and out like a pneumatic or hydraulic cylinder. The screw is usually a ball screw for efficiency, a roller screw for heavy loads or a lead screw for low cost. The rod is guided by bearings in the tube and an anti-rotation feature, and the motor is mounted inline or folded alongside through a belt or gear stage.
When engineers choose a rod actuator
Choose a rod actuator when the load is guided externally and needs pushing or pulling with controlled force, speed and position, typically to replace a pneumatic or hydraulic cylinder. It brings programmable positions, force control and energy savings. The trade-offs are side load and cost: the rod is not meant to carry significant radial load, and peak force for its size is lower than hydraulics. If the load needs carrying and guiding along the stroke, a rodless actuator or stage is usually better.
How to specify the Thomson Electrak 10
Send these with your enquiry and an engineer can confirm the right Electrak 10 variant or an equivalent:
- Force: peak and continuous or RMS (N)
- Stroke (mm) and retracted length limits
- Speed and acceleration (mm/s, m/s²)
- Duty cycle or full motion profile
- Positioning repeatability (mm)
- Side load and mounting arrangement: trunnion, clevis or flange
- Motor and feedback preference, and environment (IP code, °C)
Common mistakes to avoid
- Sizing on peak force alone instead of RMS force over the cycle
- Rigidly mounting both ends so misalignment puts side load on the rod
- Ignoring critical speed and column buckling on long strokes
- Forgetting that a ball screw back-drives, so vertical loads need a brake
Thomson Electrak 10: frequently asked questions
Can you help replace Thomson Electrak 10 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Thomson Electrak 10?
Older general-purpose DC rod actuator offered with acme or ball screw up to 6.8 kN; Thomson now files it under legacy products. Published series figures include temperature -25 °C, temperature 65 °C, force 6,800 N, stroke 610 mm. It is made by Regal Rexnord; Specify Motion can help source it or propose an equivalent.
Who makes the Thomson Electrak 10?
The Thomson Electrak 10 is made by Thomson (Regal Rexnord) and is listed here for engineers comparing options. Specify Motion is not affiliated with Regal Rexnord; brand names are used only to identify the product.
What is the temperature of the Thomson Electrak 10?
The published series minimum temperature is -25 °C. Individual models and sizes in the Electrak 10 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is the Thomson Electrak 10 still available?
Thomson lists the Electrak 10 as legacy. We can help with spares for installed machines, a migration, or an equivalent from our supply network that meets the same published figures.
What is the difference between a rod actuator and a rodless actuator?
A rod actuator pushes and pulls a rod extending from its body, so it suits loads that are guided by the machine, much like a cylinder. A rodless actuator moves a carriage along the body and carries the load itself, which handles moment loads and long strokes within the actuator's own length. Pick rod for thrust and rodless for carrying.
Can an electric rod actuator replace a hydraulic cylinder?
Often, yes, especially where force needs are moderate and precise positioning, cleanliness or energy savings matter. Electric rod actuators with roller screws reach high forces, but extreme forces in a small envelope still favour hydraulics. Compare peak and continuous force, duty, shock loads and space, and check the motor and drive sizing as well as the screw.
Further reading: How to size a linear actuator · Hydraulic to electric actuator · Linear actuators
Other rod actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Thomson Electrak 10: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.