Planetary gearbox
FAULHABER GPT planetary gearheads gearbox
All-metal planetary gearhead family from 14 to 42 mm with very fine ratio steps, plus high-torque (HT) and low-noise (LN) versions.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
UK engineering team · Product sourcing · Supply support
Get pricing, sourcing and replacement support
Need FAULHABER parts, a replacement or another suitable option? Send your part number or describe what the machine needs to do. We connect your requirement with experienced UK engineering and procurement support to help you get the right products, pricing and supply options. Your matched provider can take the enquiry through quotation and ordering to delivery and after-sales support.
- Source original parts or assess suitable alternatives
- Get pricing, lead times and a defined supply proposal
- One enquiry for components, complete axes and ongoing support
No obligation to buy. Choose the quick form below or use the full configurator on this page. Add what you know; an engineer can help with the details.
Need help choosing? Build a specification →Spec builder
Specify what you need instead of GPT planetary gearheads
Select the products and performance you need. Our UK engineering team can use your specification to help source the right components, pricing and supply options. See your summary before adding contact details.
Already know the part number? Use the quick enquiry form. You can configure a requirement below without registering.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Outer diameter | 14–42 mm |
|---|---|
| Rated torque (max) | 18 Nm |
| Ratio | 3–1,437:1 |
Summarised in our own words from Dr. Fritz Faulhaber GmbH & Co. KG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Continuous torque up to 0.4 Nm (14GPT) to 18 Nm (42GPT); 32GPT HT 10 Nm. Ratios 3.3-1437 (14/16/20GPT), 3-1294 (22/32/42GPT). Backlash described only as 'minimal' - no figure published, so backlash_arcmin_max left out.
Specify Motion is not affiliated with Dr. Fritz Faulhaber GmbH & Co. KG. FAULHABER and GPT planetary gearheads are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
FAULHABER GPT planetary gearheads replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original FAULHABER part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Apex Dynamics low-backlash planetary (inline AB, right-angle ABR), a dependable lower-backlash step up from economy ranges.
Apex Dynamics high-precision helical planetary with a one-piece stainless planet cage and very short length; ADS adds a keyed input shaft for belt pulley or coupling drive.
High-precision round-flange planetary with high input speed capability and near-zero backlash, aimed at robotics and CNC.
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a planetary gearbox is
A planetary gearbox reduces speed and multiplies torque using a central sun gear driven by the motor, several planet gears on a carrier, and an outer ring gear. Load is shared between the planets, so the gearbox is compact, coaxial and torque-dense. A single stage typically gives ratios of about 3:1 to 10:1, and stages are combined for higher ratios. Precision servo planetaries use ground helical or spur gears, preloaded output bearings and a motor adapter flange, with backlash typically a few arcminutes or less.
When engineers choose a planetary gearbox
Choose a planetary gearbox for most servo and stepper axes that need more torque, lower reflected inertia or a better inertia match. It is efficient, typically above 95% per stage, stiff and widely available in standard frames. The trade-offs are backlash, which is low but not zero, and limited single-stage ratio. For zero backlash in a compact joint, a strain-wave gear suits better. For very high shock loads, a cycloidal reducer may be more robust.
How to specify the FAULHABER GPT planetary gearheads
Send these with your enquiry and an engineer can confirm the right GPT planetary gearheads variant or an equivalent:
- Ratio and output speed (:1, rpm)
- Nominal and peak output torque (Nm)
- Emergency stop torque (Nm)
- Backlash (arcmin) and torsional stiffness (Nm/arcmin)
- Radial and axial output loads (N)
- Motor flange, shaft diameter and length (mm)
- Duty cycle, mounting orientation and lubrication
Common mistakes to avoid
- Sizing on motor torque times ratio without checking acceleration torque and service factors
- Ignoring the input speed limit at high motor speeds
- Mounting a pulley or pinion that overloads the output bearing
- Forgetting the gearbox efficiency and heat in continuous duty
FAULHABER GPT planetary gearheads: frequently asked questions
Can you help replace FAULHABER GPT planetary gearheads or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the FAULHABER GPT planetary gearheads?
All-metal planetary gearhead family from 14 to 42 mm with very fine ratio steps, plus high-torque (HT) and low-noise (LN) versions. Published series figures include outer diameter 14 mm, outer diameter 42 mm, rated torque 18 Nm, ratio 3:1. It is made by Dr. Fritz Faulhaber GmbH & Co. KG; Specify Motion can help source it or propose an equivalent.
Who makes the FAULHABER GPT planetary gearheads?
The FAULHABER GPT planetary gearheads is made by FAULHABER (Dr. Fritz Faulhaber GmbH & Co. KG) and is listed here for engineers comparing options. Specify Motion is not affiliated with Dr. Fritz Faulhaber GmbH & Co. KG; brand names are used only to identify the product.
What is the outer diameter of the FAULHABER GPT planetary gearheads?
The published series minimum outer diameter is 14 mm. Individual models and sizes in the GPT planetary gearheads range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the FAULHABER GPT planetary gearheads?
We can assess suitable replacement options. On published figures, APEX Dynamics AB / ABR and APEX Dynamics AD / ADR / ADS are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
How do I choose a planetary gearbox ratio?
Start from the load speed and motor speed range, then check inertia matching and torque. A ratio that brings the reflected load inertia close to the motor inertia improves dynamics. Then confirm peak output torque during acceleration is within the gearbox rating and that input speed stays under the limit.
What backlash does a precision planetary gearbox have?
Precision servo planetary gearboxes typically have backlash from below one arcminute to several arcminutes, depending on grade and stages. Lower backlash costs more. For most positioning axes, a few arcminutes is fine; for robot joints or optics, strain-wave or zero-backlash designs are used.
Further reading: How to select a planetary gearbox · Harmonic vs planetary vs cycloidal · Gearboxes and harmonic drives
Other planetary gearbox series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the FAULHABER GPT planetary gearheads: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
UK engineering input · A route to buying the right products
From your enquiry to products, delivery and support
Specify Motion helps turn a part number or application into a purchasing enquiry. We provide recommendations and connect your requirement with a relevant engineering or procurement provider for product selection, pricing, sourcing and supply.
- Tell us what you needSend a code or configure the application, quantities and timing.
- Reach a relevant providerAccess experienced UK engineering input and a suitable procurement route.
- Review the quotationYour provider confirms the products, price, compatibility checks and supply terms.
- Order with delivery and support agreedConfirm delivery, warranty and after-sales arrangements with the contracting provider.
You choose whether to proceed with the provider and should carry out your own checks. Website and introduction service terms.