Open and frameless slip rings
Servotecnica SVTS E (E 01-E 04) open and frameless slip ring
Open, frameless high-current slip rings with three power circuits of 20, 40 or 60 A through bores of 25.4 to 60 mm.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Servotecnica parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of SVTS E (E 01-E 04)
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Circuits (max) | 3 |
|---|---|
| Current per circuit (max) | 60 A |
| Voltage (max) | 400 V |
| Speed (max) | 300 rpm |
| Bore | 25.4–60 mm |
| Ingress protection | IP00 |
| Temperature | -20–80 °C |
| Rated life (revolutions) | 100,000,000 |
Summarised in our own words from Servotecnica SpA's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
60 A on E 03/E 04 only. ABS housing. OD not clearly labelled in drawings — not entered.
Specify Motion is not affiliated with Servotecnica SpA. Servotecnica and SVTS E (E 01-E 04) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Servotecnica SVTS E (E 01-E 04) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Servotecnica part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Sealed slip rings rated IP64 to IP68 for wet, washdown and marine settings such as ships and harbour equipment.
| Published maximum | SVTS E (E 01-E 04) | Waterproof Slip Ring |
|---|---|---|
| Circuits | 3 | 44 meets or exceeds |
| Current per circuit | 60 A | 85 A meets or exceeds |
| Speed | 300 rpm | 600 rpm meets or exceeds |
| Voltage | 400 V | 1,100 V meets or exceeds |
| Bore | 60 mm | 127 mm meets or exceeds |
Fibre optic rotary joints that carry single-mode or multi-mode optical channels across rotation for high-bandwidth, interference-free data. Channel counts run from one to fifty.
| Published maximum | SVTS E (E 01-E 04) | FR Series Fiber Optic Rotary Joint |
|---|---|---|
| Circuits | 3 | — |
| Current per circuit | 60 A | — |
| Speed | 300 rpm | 2,000 rpm meets or exceeds |
| Voltage | 400 V | — |
| Bore | 60 mm | — |
| Fibre channels | — | 50 |
Slip rings built for 800 to 15,000 rpm, mainly used on test rigs and non-destructive testing equipment.
| Published maximum | SVTS E (E 01-E 04) | High Speed Slip Ring |
|---|---|---|
| Circuits | 3 | — |
| Current per circuit | 60 A | — |
| Speed | 300 rpm | 15,000 rpm meets or exceeds |
| Voltage | 400 V | — |
| Bore | 60 mm | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an open and frameless slip ring is
An open or frameless slip ring is supplied as separate components, typically a ring assembly and one or more brush blocks, without its own housing or bearings. The machine builder mounts the rings on the rotating part and the brushes on the stationary frame, using the machine's own bearings to locate them. This lets the slip ring fit around large shafts, inside existing housings or in very short axial spaces. Designs range from precious-metal signal rings to heavy copper rings with carbon brushes for high current.
When engineers choose an open and frameless slip ring
Choose a frameless design when a housed unit will not fit, when the bore is very large or when the machine already has stiff bearings and a protected space to house the rings. It saves weight and length and avoids a second set of bearings fighting the machine's. The trade-offs are responsibility and risk: concentricity, runout, brush preload, sealing and contamination control all move to the machine builder. Plan assembly, setting and inspection procedures carefully.
How to specify the Servotecnica SVTS E (E 01-E 04)
Send these with your enquiry and an engineer can confirm the right SVTS E (E 01-E 04) variant or an equivalent:
- Ring inner and outer diameter and stack length (mm)
- Permitted runout and axial float of the machine (mm)
- Number of circuits, current and voltage (A, V)
- Brush type and number of brushes per ring
- Speed (rpm) and expected life
- Environment inside the machine: dust, oil, humidity
- How the brush block is located and adjusted
Common mistakes to avoid
- Leaving runout and concentricity tolerances undefined between ring and brush block
- Installing rings where oil mist or swarf can reach the contacts
- Not designing an anti-rotation method for the ring assembly on its shaft
- Omitting an assembly and setting procedure for the brush preload
Servotecnica SVTS E (E 01-E 04): frequently asked questions
Can you help replace Servotecnica SVTS E (E 01-E 04) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Servotecnica SVTS E (E 01-E 04)?
Open, frameless high-current slip rings with three power circuits of 20, 40 or 60 A through bores of 25.4 to 60 mm. Published series figures include circuits 3, current per circuit 60 A, voltage 400 V, speed 300 rpm. It is made by Servotecnica SpA; Specify Motion can help source it or propose an equivalent.
Who makes the Servotecnica SVTS E (E 01-E 04)?
The Servotecnica SVTS E (E 01-E 04) is made by Servotecnica (Servotecnica SpA) and is listed here for engineers comparing options. Specify Motion is not affiliated with Servotecnica SpA; brand names are used only to identify the product.
What is the circuits of the Servotecnica SVTS E (E 01-E 04)?
The published series maximum circuits is 3. Individual models and sizes in the SVTS E (E 01-E 04) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Servotecnica SVTS E (E 01-E 04)?
We can assess suitable replacement options. On published figures, Motion Control Products Waterproof Slip Ring and Motion Control Products FR Series Fiber Optic Rotary Joint are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the advantage of a frameless slip ring?
A frameless slip ring removes the housing and bearings, so it is lighter, shorter and can fit large bores or tight spaces inside an existing machine. Using the machine's own bearings also avoids alignment conflicts between two bearing sets. The machine builder takes on responsibility for runout, sealing and brush setting, so it suits teams that can control those tolerances.
How accurately must a frameless slip ring be installed?
The ring and brush block must stay concentric and within the runout and axial float the supplier specifies, typically a fraction of a millimetre, so brush pressure stays even around the turn. The rings also need protecting from contamination. Ask for an installation drawing with tolerances and a setting procedure, and allow for inspection access.
Further reading: How to select a slip ring · How to specify a slip ring · Slip rings
Other open and frameless slip rings series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Servotecnica SVTS E (E 01-E 04): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.