Brand overview
Servotecnica
Italian slip ring manufacturer whose SVTS series spans capsule, Faston, through-bore, ruggedised, open and flat designs.
Servotecnica is a brand of Servotecnica SpA (Italy). Specify Motion is not affiliated with Servotecnica SpA. This overview is written from the manufacturer's published information. We can help source parts or propose an equivalent solution.
Slip rings
SVTS A (A 01-A 07)
Capsule slip rings from 12 to 25 mm diameter with up to 56 circuits, optional IP65 sealing and fluid or fieldbus combinations.
SVTS A 03 / A 04 Ethernet
Capsule slip rings carrying 100BaseT or 1000BaseT Ethernet alongside 2 A signal circuits.
SVTS A 05
High-current 22 mm capsule with up to three power circuits rated up to 20 A.
SVTS A 06
RF capsule slip ring passing coaxial signals up to 3 GHz for HD video and CCTV, with up to 24 signals.
SVTS B (B 01-B 04)
Compact slip rings with Faston terminals for low circuit counts, offering power rings up to 20 A and long life.
SVTS C (C 01-C 11)
Through-bore slip rings from 3 mm to 100 mm bore with up to 96 circuits, power rings to 20 A at 600 V and optional pneumatic passages.
SVTS C 04 / C 05 / C 06 Ethernet
Through-bore slip rings integrating 100BaseT or 1000BaseT Ethernet with power and signal rings in 25.4 to 50 mm bores.
SVTS D (D 01-D 02)
Ruggedised slip rings in stainless steel housings, IP65 as standard, for washdown and harsh industrial environments.
SVTS E (E 01-E 04)
Open, frameless high-current slip rings with three power circuits of 20, 40 or 60 A through bores of 25.4 to 60 mm.
SVTS F (F 01)
Flat slip ring with a 40 mm through bore and 40 mm height, derived from the C Series, carrying up to 20 circuits.
Sources
Spec builder
Specify Servotecnica parts or an equivalent
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Ask about Servotecnica parts or equivalents
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.