Rodless belt actuator
Parker Hannifin HLR rodless belt actuator
High-load belt-driven rodless actuator in sizes 070 and 080; series maximum 3,847 N load, 900 N thrust, 5 m/s and 3,500 mm stroke, IP40.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Parker Hannifin parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of HLR
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP40 |
|---|---|
| Force (max) | 900 N |
| Stroke (max) | 3,500 mm |
| Linear speed (max) | 5,000 mm/s |
| Linear speed (max) | 5 m/s |
| Load max | 3,847 |
| Acceleration | up to 50 m/s2 |
Summarised in our own words from Parker-Hannifin Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Parker-Hannifin Corporation. Parker Hannifin and HLR are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Parker Hannifin HLR replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Parker Hannifin part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Wide steel-cord urethane belt version of the B3 rodless actuator for long, fast strokes up to 14.6 m and 5 m/s with integral bearing guidance.
| Published maximum | HLR | B3W Belt-Drive Rodless |
|---|---|---|
| Force | 900 N | 1,446 N meets or exceeds |
| Stroke | 3,500 mm | 14,579 mm meets or exceeds |
| Speed | 5,000 mm/s | 5,080 mm/s meets or exceeds |
Belt-driven rodless actuator in six sizes for long, fast strokes, offered unguided (U), with self-cleaning solid bearings for dusty sites (S), or on profiled rail for heavy loads (P).
| Published maximum | HLR | MXB Belt-Drive Rodless (MXB-U / MXB-S … |
|---|---|---|
| Force | 900 N | 1,859 N meets or exceeds |
| Stroke | 3,500 mm | 10,516 mm meets or exceeds |
| Speed | 5,000 mm/s | 5,080 mm/s meets or exceeds |
External ball-screw version of the hybrid linear stepper in six frame sizes, for higher efficiency and life than lead-screw units.
| Published maximum | HLR | Stepper Ball Screw Linear Actuator |
|---|---|---|
| Force | 900 N | 1,600 N meets or exceeds |
| Stroke | 3,500 mm | — |
| Speed | 5,000 mm/s | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a rodless belt actuator is
A rodless belt actuator moves a carriage along an aluminium profile using a toothed belt driven by a pulley at one end. The load mounts on the carriage, which runs on internal bearings or profile rails, so the unit carries and guides the load. Because the belt does not whip like a long screw, stroke can be long, typically several metres, and speeds are high. Belt drives are less stiff than screws, so they suit fast transfer more than high-force pushing.
When engineers choose a rodless belt actuator
Choose a belt actuator for long strokes, high speed and lighter thrust loads, such as transfer axes, gantries and pick-and-place over distance. The trade-offs are stiffness, thrust and accuracy: belt stretch reduces stiffness and repeatability compared with screw drives, and vertical axes need a brake and careful sizing. For high thrust or tight positioning at short stroke, a screw rodless actuator is usually a better fit.
How to specify the Parker Hannifin HLR
Send these with your enquiry and an engineer can confirm the right HLR variant or an equivalent:
- Payload mass and moment loads (kg, Nm)
- Stroke (mm or m)
- Speed and acceleration (m/s, m/s²)
- Positioning repeatability (mm)
- Thrust force needed (N)
- Orientation and any vertical axis requirements
- Motor mounting, gearbox and environment
Common mistakes to avoid
- Forgetting belt tension and stretch when tight repeatability is needed
- Using a belt actuator for pressing or high thrust tasks
- Ignoring reflected inertia and gearbox ratio on high-acceleration axes
- Mounting the profile unsupported over long spans
Parker Hannifin HLR: frequently asked questions
Can you help replace Parker Hannifin HLR or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Parker Hannifin HLR?
High-load belt-driven rodless actuator in sizes 070 and 080; series maximum 3,847 N load, 900 N thrust, 5 m/s and 3,500 mm stroke, IP40. Published series figures include force 900 N, stroke 3,500 mm, linear speed 5,000 mm/s, linear speed 5 m/s. It is made by Parker-Hannifin Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the Parker Hannifin HLR?
The Parker Hannifin HLR is made by Parker Hannifin (Parker-Hannifin Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with Parker-Hannifin Corporation; brand names are used only to identify the product.
What is the force of the Parker Hannifin HLR?
The published series maximum force is 900 N. Individual models and sizes in the HLR range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Parker Hannifin HLR?
We can assess suitable replacement options. On published figures, Tolomatic B3W Belt-Drive Rodless and Tolomatic MXB Belt-Drive Rodless (MXB-U / MXB-S / MXB-P) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
How long can a belt-driven linear actuator be?
Belt actuators commonly reach several metres of stroke from one profile, and longer strokes are possible with joined profiles. The limits are profile stiffness, belt stretch, support spacing and the moment loads on the carriage. Long axes need regular supports along their length to avoid sag.
How accurate is a belt-driven actuator?
Repeatability on belt actuators is typically in the region of a tenth of a millimetre, depending on belt type, tension and load, which is coarser than screw drives. Accuracy is affected by belt stretch and pulley tolerances. For better accuracy, add linear encoder feedback or choose a screw drive.
Further reading: Rodless belt vs screw actuators · How to size a linear actuator · Linear actuators
Other rodless belt actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Parker Hannifin HLR: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.