DC servo motor
Kinco SMK Series Low-Voltage DC Servo Motors
Low-voltage brushless DC servo motors for 48 or 96 VDC systems, with a 12-slot/10-pole design, matched to the Kinco FD1X5 drive and aimed at robotics, CNC and automated lines.
Key specifications
| Power | 200–5,000 W |
|---|---|
| Frame sizes | 60, 80, 180 mm |
| Supply | 48 VDC or 96 VDC |
| Feedback | Absolute encoder |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Options
- Optional brake
- Insulation class F
- Energy efficiency class 2
Typical applications
What a DC servo motor is
A DC servo motor, in current usage, is usually a low-voltage brushless permanent-magnet motor designed to run from a DC bus, typically 24 to 96 V, under closed-loop servo control. Electronically it works like an AC servo, with a three-phase stator commutated by the drive and encoder or Hall feedback on the shaft. The lower voltage means higher current for the same power, but suits battery-powered and safety-extra-low-voltage machines. Small precision brushless servomotors also fall into this group.
When engineers choose a DC servo motor
Choose a low-voltage DC servo for mobile robots, AGVs, battery equipment, medical devices and compact machines where mains voltage is impractical or unsafe. It allows simple power distribution and safe access. The trade-offs are current and power range: high current means thicker cables and higher losses, so power is typically limited to a few kilowatts. For mains-powered machines above that, an AC servo is usually simpler.
How to specify the Kinco SMK Series Low-Voltage DC Servo Motors
Send these with your enquiry and an engineer can confirm the right SMK Series Low-Voltage DC Servo Motors variant:
- Bus voltage (V DC) and battery range
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Continuous and peak current (A)
- Feedback type and resolution
- Brake, IP code and frame size (mm)
- Drive and network interface
Common mistakes to avoid
- Sizing at nominal battery voltage without checking the low-charge end
- Undersizing cables for the higher current
- Ignoring regenerative energy into a battery or supply
- Mixing motor and drive feedback types that are not compatible
Kinco SMK Series Low-Voltage DC Servo Motors: frequently asked questions
What is the Kinco SMK Series Low-Voltage DC Servo Motors?
Low-voltage brushless DC servo motors for 48 or 96 VDC systems, with a 12-slot/10-pole design, matched to the Kinco FD1X5 drive and aimed at robotics, CNC and automated lines. Published series figures include power 200 W, power 5,000 W. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Kinco SMK Series Low-Voltage DC Servo Motors?
The Kinco SMK Series Low-Voltage DC Servo Motors is made by Kinco (Kinco Automation) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the power of the Kinco SMK Series Low-Voltage DC Servo Motors?
The published series minimum power is 200 W. Individual models and sizes in the SMK Series Low-Voltage DC Servo Motors range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
What is the difference between an AC servo and a DC servo motor?
Both are typically brushless permanent-magnet motors under closed-loop control. The main difference is the supply: AC servos are wound for drives fed from mains voltage, while DC servos are wound for low-voltage DC buses. DC servos suit battery and low-voltage machines; AC servos suit higher-power mains machines.
How does battery voltage affect a DC servo motor?
Motor speed is roughly proportional to available voltage, so as a battery discharges the top speed falls. Size the motor at the lowest working battery voltage. Also allow for regenerative energy during braking, which raises bus voltage and must be absorbed by the battery or a braking circuit.
Further reading: How to select a servo motor · How to select a dc motor · Servo and stepper motors
Often compared with
Engineers specifying this series often compare it with:
Other dc servo motor series
Spec builder
Configure Kinco SMK Series Low-Voltage DC Servo Motors
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Need Kinco SMK Series Low-Voltage DC Servo Motors or a complete system around it?
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.