DC servo motor
ElectroCraft RapidPower Xtreme (RPX) DC servo motor
Compact brushless DC motors in 16.25, 22, 32, 40 and 52 mm frames with 12, 24 or 48 V windings and peak torque from 35 mNm to 3.15 Nm (series maximum); LRPX planetary gearmotor versions reach 22.5 Nm.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need ElectroCraft parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of RapidPower Xtreme (RPX)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Voltage (max) | 48 V |
|---|---|
| Peak torque (max) | 3.151 Nm |
| Frame sizes | 16.25, 22, 32, 40, 52 |
| Supply | 12, 24 or 48 V windings |
| Gearmotor torque | LRPX up to 22.5 Nm peak |
Summarised in our own words from ElectroCraft, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Continuous torque, speed and power not published on the overview page.
Specify Motion is not affiliated with ElectroCraft, Inc.. ElectroCraft and RapidPower Xtreme (RPX) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
ElectroCraft RapidPower Xtreme (RPX) replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original ElectroCraft part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Leadshine low-voltage PMSM servo motors from a 25 mm 33 W unit up to a 130 mm 2 kW unit, wound for 24-60 V DC buses. Fully published data covers torque to 6.4 Nm rated / 16 Nm peak, 17-bit absolute or 2500 ppr incremental encoders and IP65. Designed for ELD2, 2ELD2 and ELD3 drives.
| Published maximum | RapidPower Xtreme (RPX) | ELVM Series Low-Voltage DC Servo Motors |
|---|---|---|
| Rated torque | — | 6.4 Nm |
| Peak torque | 3.15 Nm | 16 Nm meets or exceeds |
| Speed | — | 6,000 rpm |
| Power | — | 2,000 W |
Brushed permanent-magnet DC servomotors in 82 mm and 102 mm frames with a 9.5 V/krpm tachogenerator on every model. Continuous stall torque runs 0.5-4.5 Nm with peaks to 22 Nm, and the motors work with most brushed servo drives on the market.
| Published maximum | RapidPower Xtreme (RPX) | BDS Series DC Brushed Servomotors (82B… |
|---|---|---|
| Rated torque | — | 4.3 Nm |
| Peak torque | 3.15 Nm | 22 Nm meets or exceeds |
| Speed | — | 5,000 rpm |
| Power | — | 964 W |
A complete AGV drive wheel combining servo motor, drive, reducer, brake and polyurethane tyre in one unit on 24-60 VDC with CANopen. Three published sizes (150, 165 and 180 mm wheels) give 3.6-40 Nm rated and up to 99 Nm peak at the wheel, for mobile robots carrying up to 1 tonne.
| Published maximum | RapidPower Xtreme (RPX) | iWMC Integrated Servo Wheel |
|---|---|---|
| Rated torque | — | 40 Nm |
| Peak torque | 3.15 Nm | 99 Nm meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a DC servo motor is
A DC servo motor, in current usage, is usually a low-voltage brushless permanent-magnet motor designed to run from a DC bus, typically 24 to 96 V, under closed-loop servo control. Electronically it works like an AC servo, with a three-phase stator commutated by the drive and encoder or Hall feedback on the shaft. The lower voltage means higher current for the same power, but suits battery-powered and safety-extra-low-voltage machines. Small precision brushless servomotors also fall into this group.
When engineers choose a DC servo motor
Choose a low-voltage DC servo for mobile robots, AGVs, battery equipment, medical devices and compact machines where mains voltage is impractical or unsafe. It allows simple power distribution and safe access. The trade-offs are current and power range: high current means thicker cables and higher losses, so power is typically limited to a few kilowatts. For mains-powered machines above that, an AC servo is usually simpler.
How to specify the ElectroCraft RapidPower Xtreme (RPX)
Send these with your enquiry and an engineer can confirm the right RapidPower Xtreme (RPX) variant or an equivalent:
- Bus voltage (V DC) and battery range
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Continuous and peak current (A)
- Feedback type and resolution
- Brake, IP code and frame size (mm)
- Drive and network interface
Common mistakes to avoid
- Sizing at nominal battery voltage without checking the low-charge end
- Undersizing cables for the higher current
- Ignoring regenerative energy into a battery or supply
- Mixing motor and drive feedback types that are not compatible
ElectroCraft RapidPower Xtreme (RPX): frequently asked questions
Can you help replace ElectroCraft RapidPower Xtreme (RPX) or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the ElectroCraft RapidPower Xtreme (RPX)?
Compact brushless DC motors in 16.25, 22, 32, 40 and 52 mm frames with 12, 24 or 48 V windings and peak torque from 35 mNm to 3.15 Nm (series maximum); LRPX planetary gearmotor versions reach 22.5 Nm. Published series figures include voltage 48 V, peak torque 3.151 Nm. It is made by ElectroCraft, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the ElectroCraft RapidPower Xtreme (RPX)?
The ElectroCraft RapidPower Xtreme (RPX) is made by ElectroCraft (ElectroCraft, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with ElectroCraft, Inc.; brand names are used only to identify the product.
What is the voltage of the ElectroCraft RapidPower Xtreme (RPX)?
The published series maximum voltage is 48 V. Individual models and sizes in the RapidPower Xtreme (RPX) range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the ElectroCraft RapidPower Xtreme (RPX)?
We can assess suitable replacement options. On published figures, Leadshine ELVM Series Low-Voltage DC Servo Motors and Motion Control Products BDS Series DC Brushed Servomotors (82BDS, 102BDS) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between an AC servo and a DC servo motor?
Both are typically brushless permanent-magnet motors under closed-loop control. The main difference is the supply: AC servos are wound for drives fed from mains voltage, while DC servos are wound for low-voltage DC buses. DC servos suit battery and low-voltage machines; AC servos suit higher-power mains machines.
How does battery voltage affect a DC servo motor?
Motor speed is roughly proportional to available voltage, so as a battery discharges the top speed falls. Size the motor at the lowest working battery voltage. Also allow for regenerative energy during braking, which raises bus voltage and must be absorbed by the battery or a braking circuit.
Further reading: How to select a servo motor · How to select a dc motor · Servo and stepper motors
Other dc servo motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the ElectroCraft RapidPower Xtreme (RPX): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.