Magnetic linear encoder
Lika Electronic SME21 magnetic linear encoder
Contactless magnetic linear sensor head for use with Lika magnetic tape, giving up to 1 µm resolution with push-pull or line-driver incremental outputs for linear and angular measurement.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Lika Electronic parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of SME21
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Data / bus | push-pull (HTL), line driver (TTL/RS422) |
|---|---|
| Resolution (finest) | 1,000 nm |
| Resolution | 1 µm max. |
| Scale | Lika magnetic tape (MTI tape up to 100 m) |
Summarised in our own words from Lika Electronic s.r.l.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
SME11 (down to 0.5 µm, for linear and torque motors) is listed in the same range but was not opened.
Specify Motion is not affiliated with Lika Electronic s.r.l.. Lika Electronic and SME21 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Lika Electronic SME21 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Lika Electronic part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Absolute linear magnetic read head for LMSA scales, 1 µm resolution, up to 10 m/s, IP67.
Absolute PRC-coded two-track magnetic scale, so position is known at power-up without homing; up to 32.7 m.
Incremental magnetic scale bar up to 2000 mm long.
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a magnetic linear encoder is
A magnetic linear encoder reads position from a magnetised scale, usually a flexible tape or a stainless-steel-covered strip with alternating poles, using a readhead with Hall-effect or magnetoresistive sensors. The readhead outputs incremental quadrature or analogue signals, or absolute position from a coded track. The scale can be cut to length and bonded to the machine, making long axes economical. Magnetic linear encoders tolerate dust, oil and coolant better than open optical systems.
When engineers choose a magnetic linear encoder
Choose a magnetic linear encoder for robust position feedback on long axes in harsh environments, such as woodworking, metal processing, packaging and linear motors on general automation. It is affordable and easy to install. The trade-offs are resolution and accuracy, which are typically lower than optical scales, and sensitivity to strong magnetic fields or ferrous debris. For precision metrology, optical or enclosed scales suit better.
How to specify the Lika Electronic SME21
Send these with your enquiry and an engineer can confirm the right SME21 variant or an equivalent:
- Resolution and accuracy (µm)
- Measuring length (mm or m)
- Absolute or incremental output
- Interface: TTL, sin/cos, SSI, BiSS
- Ride height and alignment tolerances (mm)
- Maximum speed (m/s)
- Environment and IP code
Common mistakes to avoid
- Exceeding ride height tolerances during installation
- Exposing tape to strong magnetic fields or magnetic tools
- Ignoring thermal expansion of the tape and substrate
- Expecting optical-grade accuracy
Lika Electronic SME21: frequently asked questions
Can you help replace Lika Electronic SME21 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Lika Electronic SME21?
Contactless magnetic linear sensor head for use with Lika magnetic tape, giving up to 1 µm resolution with push-pull or line-driver incremental outputs for linear and angular measurement. Published series figures include resolution (finest) 1,000 nm. It is made by Lika Electronic s.r.l.; Specify Motion can help source it or propose an equivalent.
Who makes the Lika Electronic SME21?
The Lika Electronic SME21 is made by Lika Electronic (Lika Electronic s.r.l.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Lika Electronic s.r.l.; brand names are used only to identify the product.
What is the resolution (finest) of the Lika Electronic SME21?
The published series maximum resolution (finest) is 1,000 nm. Individual models and sizes in the SME21 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Lika Electronic SME21?
We can assess suitable replacement options. On published figures, Bogen ALS21 and Bogen LMSA are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
How accurate is a magnetic linear encoder?
Accuracy depends on the scale and readhead, but magnetic linear encoders are typically accurate to several micrometres or tens of micrometres per metre, with resolution down to around a micrometre. This suits general automation and woodworking. For sub-micrometre accuracy, optical scales are usually needed.
Can magnetic tape scales be cut to length?
Many magnetic tape scales are supplied on a reel and can be cut to the required length, then bonded to the machine with adhesive backing and a cover strip. This makes long axes simple and economical. Follow the manufacturer's handling guidance to avoid damaging the magnetisation.
Further reading: How to select a linear encoder · Magnetic vs capacitive vs optical encoders · Encoders and feedback
Other magnetic linear encoder series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Lika Electronic SME21: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.