Optical absolute encoder
Baumer OptoTurn EAL580 optical absolute encoder
58 mm optical multiturn absolute encoder with Industrial Ethernet built in: 18-bit single-turn plus 13-bit multiturn (31 bits), ±0.01° accuracy, EtherCAT (62.5 µs cycle), PROFINET IRT or EtherNet/IP, IP65 and -40 to +85 °C.
Key specifications
| Speed (max) | 6,000 rpm |
|---|---|
| Bore (max) | 12 mm |
| Ingress protection | IP65 |
| Temperature | -40–85 °C |
| Data / bus | EtherCAT, PROFINET IO (RT/IRT, MRP), EtherNet/IP (DLR) |
| Supply | 10–30 V DC |
| Resolution (max) | 31 bit |
| Accuracy | ±0.01° (18/13 bit version) |
| Weight | 500 g |
| Resolution | 18 bit single-turn + 13 bit multiturn (or 13 + 16 bit) |
| Housing | 58 |
| Shock | 100 g, 2 ms |
| Shaft | blind hollow, solid and through hollow versions |
Summarised in our own words from Baumer Group's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Figures from EAL580-BBC.5WEC.18130.A; protocol features from the 58 mm compact family page.
Specify Motion is not affiliated with Baumer Group. Baumer and OptoTurn EAL580 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Baumer part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
Multi-turn absolute hollow-shaft capacitive encoder that holds position through power loss, so no re-homing.
| Published maximum | OptoTurn EAL580 | VLM |
|---|---|---|
| Resolution | 31 bit | 32 bit meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What an optical absolute encoder is
An optical absolute encoder reads a unique code pattern on a disc or scale, so every position has its own digital value and position is known immediately at power-up. Single-turn encoders give position within one revolution; multi-turn encoders also count revolutions using gears or electronic counters. Position is sent over a serial interface such as SSI or BiSS, a manufacturer-specific protocol, or a fieldbus. Optical scanning gives high resolution, typically 17 bits per revolution or more in servo encoders, and good accuracy.
When engineers choose an optical absolute encoder
Choose an optical absolute encoder where knowing position at power-up matters, such as robots, machine tools, multi-axis machines and axes that cannot be homed safely. It removes homing routines and supports safety functions. The trade-offs are cost, interface compatibility and contamination sensitivity. Battery-backed multi-turn types need battery maintenance; gear or energy-harvesting types avoid that. In very dirty environments, magnetic or inductive absolute encoders may suit better.
How to specify the Baumer OptoTurn EAL580
Send these with your enquiry and an engineer can confirm the right OptoTurn EAL580 variant or an equivalent:
- Single-turn resolution (bits)
- Multi-turn range (revolutions)
- Interface: SSI, BiSS, proprietary serial or fieldbus
- Accuracy (arcsec)
- Shaft or hollow shaft size (mm)
- Speed (rpm)
- Environment and safety rating
Common mistakes to avoid
- Choosing an interface the drive does not support
- Forgetting battery maintenance on battery-backed multi-turn types
- Confusing resolution with accuracy
- Ignoring cable length limits for serial interfaces
Baumer OptoTurn EAL580: frequently asked questions
What is the Baumer OptoTurn EAL580?
58 mm optical multiturn absolute encoder with Industrial Ethernet built in: 18-bit single-turn plus 13-bit multiturn (31 bits), ±0.01° accuracy, EtherCAT (62.5 µs cycle), PROFINET IRT or EtherNet/IP, IP65 and -40 to +85 °C. Published series figures include speed 6,000 rpm, bore 12 mm, temperature -40 °C, temperature 85 °C. It is made by Baumer Group; Specify Motion can help source it or propose an equivalent.
Who makes the Baumer OptoTurn EAL580?
The Baumer OptoTurn EAL580 is made by Baumer (Baumer Group) and is listed here for engineers comparing options. Specify Motion is not affiliated with Baumer Group; brand names are used only to identify the product.
What is the speed of the Baumer OptoTurn EAL580?
The published series maximum speed is 6,000 rpm. Individual models and sizes in the OptoTurn EAL580 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Baumer OptoTurn EAL580?
Yes. On published figures, Netzer Precision VLM is the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between single-turn and multi-turn absolute encoders?
A single-turn absolute encoder knows its angle within one revolution. A multi-turn absolute encoder also counts complete revolutions, so it knows total position over many turns even after power loss. Multi-turn encoders avoid homing on axes driven through screws or gears.
Which interface should an absolute encoder use?
Use the interface supported by the drive or controller. SSI is simple and widely supported, BiSS-C is an open bidirectional protocol, and several manufacturer-specific protocols are common on machine tools and servo drives. Fieldbus encoders suit PLC networks. Check cable lengths and update rates for the control loop.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical absolute encoder series
Spec builder
Specify what you need instead of OptoTurn EAL580
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Baumer OptoTurn EAL580: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.