Rodless screw actuator
IAI ROBO Cylinder RCS4 rodless screw actuator
AC servo ROBO Cylinder with 60 to 400 W motors and battery-less absolute encoders; series maxima of 1,100 mm stroke, 2,200 mm/s (SA8C, 48 mm lead), 100 kg horizontal payload and ±0.005 mm repeatability on high-precision versions.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need IAI parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of ROBO Cylinder RCS4
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Stroke (max) | 1,100 mm |
|---|---|
| Linear speed (max) | 2,200 mm/s |
| Repeatability | 0.005 mm |
| Power | 60–400 W |
| Feedback | Battery-less absolute encoder |
| Payload (max) | 100 kg |
| Variants | Slider (SA), wide slider (WSA), rod (RA), radial cylinder (RRA, WRA), table (TA); coupled or side-mounted motor; cleanroom RCS4CR |
Summarised in our own words from IAI Corporation's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Standard repeatability ±0.01 mm; ±0.005 mm on selected high-precision models. Vertical payload maximum 72 kg (RA8/RRA8, 5 mm lead).
Specify Motion is not affiliated with IAI Corporation. IAI and ROBO Cylinder RCS4 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
IAI ROBO Cylinder RCS4 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original IAI part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Economical rodless screw actuator derived from the BC2 band cylinder, with solid-bearing rods and a stainless band seal for light to moderate loads.
| Published maximum | ROBO Cylinder RCS4 | BCS Rodless Screw (BCS/MCS) |
|---|---|---|
| Force | — | 11,700 N |
| Stroke | 1,100 mm | 3,048 mm meets or exceeds |
| Speed | 2,200 mm/s | — |
Screw-driven rodless actuator in six sizes, with a solid-bearing (S) or profiled-rail (P) carrier for moderate to heavy guided loads.
| Published maximum | ROBO Cylinder RCS4 | MXE Screw-Drive Rodless (MXE-S / MXE-P) |
|---|---|---|
| Force | — | 19,127 N |
| Stroke | 1,100 mm | 3,411 mm meets or exceeds |
| Speed | 2,200 mm/s | — |
Wide steel-cord urethane belt version of the B3 rodless actuator for long, fast strokes up to 14.6 m and 5 m/s with integral bearing guidance.
| Published maximum | ROBO Cylinder RCS4 | B3W Belt-Drive Rodless |
|---|---|---|
| Force | — | 1,446 N |
| Stroke | 1,100 mm | 14,579 mm meets or exceeds |
| Speed | 2,200 mm/s | 5,080 mm/s meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a rodless screw actuator is
A rodless screw actuator moves a carriage along the actuator body using a ball or lead screw inside a profile. The load mounts directly on the carriage, which runs on guides, either internal bearings or profile rails, so the actuator carries and guides the load as well as moving it. A sealing band typically closes the slot along the body. The motor mounts at one end, inline or folded, and stroke is set by the body length.
When engineers choose a rodless screw actuator
Choose a rodless screw actuator when the load needs carrying along a guided path with good positioning accuracy and stiffness, such as in pick-and-place, gantries and positioning axes. Screw drive gives high thrust and precision. The trade-offs are speed and length: long screws hit critical speed limits, so long strokes run slower. For long, fast strokes with lighter loads, a belt-driven rodless actuator is usually better.
How to specify the IAI ROBO Cylinder RCS4
Send these with your enquiry and an engineer can confirm the right ROBO Cylinder RCS4 variant or an equivalent:
- Payload mass and position offset (kg, mm)
- Moment loads on the carriage (Nm)
- Stroke (mm), speed (mm/s) and acceleration (m/s²)
- Thrust force needed (N)
- Repeatability (mm)
- Orientation: horizontal, vertical or wall-mounted
- Environment and sealing (IP code)
Common mistakes to avoid
- Ignoring moment loads from offset payloads
- Choosing a long stroke at high speed and exceeding screw critical speed
- Not adding a brake for vertical axes
- Assuming the sealing band keeps out fine dust or liquids
IAI ROBO Cylinder RCS4: frequently asked questions
Can you help replace IAI ROBO Cylinder RCS4 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the IAI ROBO Cylinder RCS4?
AC servo ROBO Cylinder with 60 to 400 W motors and battery-less absolute encoders; series maxima of 1,100 mm stroke, 2,200 mm/s (SA8C, 48 mm lead), 100 kg horizontal payload and ±0.005 mm repeatability on high-precision versions. Published series figures include stroke 1,100 mm, linear speed 2,200 mm/s, repeatability 0.005 mm, power 60 W. It is made by IAI Corporation; Specify Motion can help source it or propose an equivalent.
Who makes the IAI ROBO Cylinder RCS4?
The IAI ROBO Cylinder RCS4 is made by IAI (IAI Corporation) and is listed here for engineers comparing options. Specify Motion is not affiliated with IAI Corporation; brand names are used only to identify the product.
What is the stroke of the IAI ROBO Cylinder RCS4?
The published series maximum stroke is 1,100 mm. Individual models and sizes in the ROBO Cylinder RCS4 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the IAI ROBO Cylinder RCS4?
We can assess suitable replacement options. On published figures, Tolomatic BCS Rodless Screw (BCS/MCS) and Tolomatic MXE Screw-Drive Rodless (MXE-S / MXE-P) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Is a belt or screw rodless actuator better?
A screw rodless actuator gives more thrust, stiffness and positioning accuracy, which suits pressing, vertical axes and precise positioning. A belt actuator is faster and handles longer strokes, which suits transfer and pick-and-place over distance. Many machines use both: belts for long horizontal moves and screws for shorter, precise or vertical axes.
What limits the speed of a screw-driven actuator?
Speed is limited by the screw's critical speed, the rotation at which it starts to whip. Critical speed falls sharply as unsupported length increases, so long strokes have lower maximum speeds. Screw supports, larger diameters or a coarser lead raise usable speed. Manufacturers publish speed against stroke curves that should be checked.
Further reading: Rodless belt vs screw actuators · How to size a linear actuator · Linear actuators
Other rodless screw actuator series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the IAI ROBO Cylinder RCS4: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.