Frameless torque motor
maxon EC frameless DT / HT torque motor
Brushless rotor-and-stator kits for direct integration into robot joints and exoskeletons, in a DT range for dynamics and an HT range for high torque.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need maxon parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Specify what you need instead of EC frameless DT / HT
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Outer diameter | 38–90 mm |
|---|---|
| Continuous torque (max) | 2.84 Nm |
| Power (max) | 680 W |
Summarised in our own words from maxon group (maxon motor ag)'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
maxon Product Range 2026/27 catalogue. Nominal torque max 2,840 mNm (DT 85 L). Diameters taken from model designations (DT 38-85, HT 60-90). Power/torque pairing in page text matched by order - check against data sheets. Max speed not published on the overview page.
Specify Motion is not affiliated with maxon group (maxon motor ag). maxon and EC frameless DT / HT are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
maxon EC frameless DT / HT replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original maxon part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
In-runner frameless torque motors from 65 to 410 mm stator OD with 8-64 poles, low profile and large through-holes; windings tailored to target speed.
| Published maximum | EC frameless DT / HT | TI Series In-Runner Frameless Direct D… |
|---|---|---|
| Continuous torque | 2.84 Nm | 70 Nm meets or exceeds |
Compact frameless rotor/stator kits for low-voltage (48 VDC) systems, in 45-90 mm frames with low- and high-speed windings. Suited to small rotary tables and robot joints where the motor is built into the host structure.
| Published maximum | EC frameless DT / HT | ADR-F |
|---|---|---|
| Continuous torque | 2.84 Nm | 3.75 Nm meets or exceeds |
| Peak torque | — | 11.22 Nm |
| Speed | — | 3,000 rpm |
High-voltage (600 VDC) frameless torque motor kits from 110 to 360 mm with large through-bores and integrated Hall sensors; the high-torque end of the Akribis frameless range.
| Published maximum | EC frameless DT / HT | ADR-P |
|---|---|---|
| Continuous torque | 2.84 Nm | 365 Nm meets or exceeds |
| Peak torque | — | 985.5 Nm |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What a frameless torque motor is
A frameless torque motor is a permanent-magnet brushless motor supplied as two parts, a rotor and a stator, with no housing, bearings or shaft. The machine builder mounts the rotor directly on the driven shaft and the stator in the machine structure, so the motor becomes part of the mechanism. Many have large through-holes and high pole counts, giving high torque at low speed with no gearbox. They need separate feedback, typically an encoder, and a servo drive.
When engineers choose a frameless torque motor
Choose a frameless motor when you want direct drive in a compact, integrated design, such as robot joints, gimbals, rotary tables and medical devices. Removing the gearbox eliminates backlash and improves stiffness and smoothness. The trade-offs are integration work and size: the builder supplies bearings, alignment, cooling and feedback, and torque per volume is lower than a geared solution. For off-the-shelf installation, a housed direct-drive motor may be simpler.
How to specify the maxon EC frameless DT / HT
Send these with your enquiry and an engineer can confirm the right EC frameless DT / HT variant or an equivalent:
- Continuous and peak torque (Nm)
- Speed (rpm)
- Outer diameter, bore and stack length (mm)
- Bus voltage and current (V, A)
- Thermal mounting and cooling
- Feedback type and resolution
- Air gap and concentricity tolerance (mm)
Common mistakes to avoid
- Leaving air gap and concentricity tolerances undefined
- Ignoring heat conduction from the stator into the housing
- Using an encoder with too low resolution for direct drive
- Forgetting rotor magnet attraction during assembly
maxon EC frameless DT / HT: frequently asked questions
Can you help replace maxon EC frameless DT / HT or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the maxon EC frameless DT / HT?
Brushless rotor-and-stator kits for direct integration into robot joints and exoskeletons, in a DT range for dynamics and an HT range for high torque. Published series figures include outer diameter 38 mm, outer diameter 90 mm, continuous torque 2.84 Nm, power 680 W. It is made by maxon group (maxon motor ag); Specify Motion can help source it or propose an equivalent.
Who makes the maxon EC frameless DT / HT?
The maxon EC frameless DT / HT is made by maxon (maxon group (maxon motor ag)) and is listed here for engineers comparing options. Specify Motion is not affiliated with maxon group (maxon motor ag); brand names are used only to identify the product.
What is the outer diameter of the maxon EC frameless DT / HT?
The published series minimum outer diameter is 38 mm. Individual models and sizes in the EC frameless DT / HT range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the maxon EC frameless DT / HT?
We can assess suitable replacement options. On published figures, Motion Control Products TI Series In-Runner Frameless Direct Drive Torque Motors and Akribis Systems ADR-F are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between a frameless and a housed torque motor?
A frameless motor is only a rotor and stator; the machine provides bearings, shaft, housing and feedback. A housed direct-drive motor adds bearings, housing and encoder in a ready-to-install unit. Frameless suits compact, integrated designs where the machine already has stiff bearings; housed suits faster installation and simpler alignment.
Why use a frameless motor instead of a gearbox?
Direct drive removes backlash, wear and compliance in the gear train, giving smoother motion and stiffer control. It also allows a large hollow shaft for cabling. The trade-off is that torque must come from the motor alone, so it is larger for a given torque.
Further reading: How to select a frameless torque motor · Frameless motor sizing robot joints · Frameless and torque motors
Other frameless torque motor series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the maxon EC frameless DT / HT: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.