DC servo motor
Portescap 35GLT high-performance brush DC servo motor
35 mm high-power coreless brush DC motor with 13-segment graphite-copper commutation: up to 160 mNm continuous, over 1.4 Nm stall torque, 10,000 rpm and 150 W continuous, wound for 24–90 V.
Key specifications
| Outer diameter (max) | 35 mm |
|---|---|
| Rated torque (max) | 0.16 Nm |
| Peak torque (max) | 1.487 Nm |
| Speed (max) | 10,000 rpm |
| Power (max) | 150 W |
| Supply | 24–90 V nominal by winding |
| Efficiency | 85–89% |
| Commutation | graphite-copper, 13 segments |
Summarised in our own words from Regal Rexnord's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Figures for the 35GLT2R82; torque_Nm_peak_max is the highest listed stall torque, not a rated peak.
Specify Motion is not affiliated with Regal Rexnord. Portescap and 35GLT high-performance brush DC are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Portescap part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
A single 110 mm, 1.2 kW, 48 VDC servo motor giving 4 Nm at 3000 rpm for higher-power low-voltage systems, paired with Kinco FD1 and OD drives.
| Published maximum | 35GLT high-performance brush DC | SMH Series Low-Voltage DC Servo Motor … |
|---|---|---|
| Rated torque | 0.16 Nm | 4 Nm meets or exceeds |
| Peak torque | 1.49 Nm | — |
| Speed | 10,000 rpm | — |
| Power | 150 W | 1,200 W meets or exceeds |
Leadshine low-voltage PMSM servo motors from a 25 mm 33 W unit up to a 130 mm 2 kW unit, wound for 24-60 V DC buses. Fully published data covers torque to 6.4 Nm rated / 16 Nm peak, 17-bit absolute or 2500 ppr incremental encoders and IP65. Designed for ELD2, 2ELD2 and ELD3 drives.
| Published maximum | 35GLT high-performance brush DC | ELVM Series Low-Voltage DC Servo Motors |
|---|---|---|
| Rated torque | 0.16 Nm | 6.4 Nm meets or exceeds |
| Peak torque | 1.49 Nm | 16 Nm meets or exceeds |
| Speed | 10,000 rpm | 6,000 rpm |
| Power | 150 W | 2,000 W meets or exceeds |
Low-voltage brushless DC servo motors for 48 or 96 VDC systems, with a 12-slot/10-pole design, matched to the Kinco FD1X5 drive and aimed at robotics, CNC and automated lines.
| Published maximum | 35GLT high-performance brush DC | SMK Series Low-Voltage DC Servo Motors |
|---|---|---|
| Rated torque | 0.16 Nm | — |
| Peak torque | 1.49 Nm | — |
| Speed | 10,000 rpm | — |
| Power | 150 W | 5,000 W meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a DC servo motor is
A DC servo motor, in current usage, is usually a low-voltage brushless permanent-magnet motor designed to run from a DC bus, typically 24 to 96 V, under closed-loop servo control. Electronically it works like an AC servo, with a three-phase stator commutated by the drive and encoder or Hall feedback on the shaft. The lower voltage means higher current for the same power, but suits battery-powered and safety-extra-low-voltage machines. Small precision brushless servomotors also fall into this group.
When engineers choose a DC servo motor
Choose a low-voltage DC servo for mobile robots, AGVs, battery equipment, medical devices and compact machines where mains voltage is impractical or unsafe. It allows simple power distribution and safe access. The trade-offs are current and power range: high current means thicker cables and higher losses, so power is typically limited to a few kilowatts. For mains-powered machines above that, an AC servo is usually simpler.
How to specify the Portescap 35GLT high-performance brush DC
Send these with your enquiry and an engineer can confirm the right 35GLT high-performance brush DC variant or an equivalent:
- Bus voltage (V DC) and battery range
- Continuous and peak torque (Nm)
- Rated and maximum speed (rpm)
- Continuous and peak current (A)
- Feedback type and resolution
- Brake, IP code and frame size (mm)
- Drive and network interface
Common mistakes to avoid
- Sizing at nominal battery voltage without checking the low-charge end
- Undersizing cables for the higher current
- Ignoring regenerative energy into a battery or supply
- Mixing motor and drive feedback types that are not compatible
Portescap 35GLT high-performance brush DC: frequently asked questions
What is the Portescap 35GLT high-performance brush DC?
35 mm high-power coreless brush DC motor with 13-segment graphite-copper commutation: up to 160 mNm continuous, over 1.4 Nm stall torque, 10,000 rpm and 150 W continuous, wound for 24–90 V. Published series figures include outer diameter 35 mm, rated torque 0.16 Nm, peak torque 1.487 Nm, speed 10,000 rpm. It is made by Regal Rexnord; Specify Motion can help source it or propose an equivalent.
Who makes the Portescap 35GLT high-performance brush DC?
The Portescap 35GLT high-performance brush DC is made by Portescap (Regal Rexnord) and is listed here for engineers comparing options. Specify Motion is not affiliated with Regal Rexnord; brand names are used only to identify the product.
What is the outer diameter of the Portescap 35GLT high-performance brush DC?
The published series maximum outer diameter is 35 mm. Individual models and sizes in the 35GLT high-performance brush DC range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Portescap 35GLT high-performance brush DC?
Yes. On published figures, Kinco SMH Series Low-Voltage DC Servo Motor (SMH110D) and Leadshine ELVM Series Low-Voltage DC Servo Motors are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between an AC servo and a DC servo motor?
Both are typically brushless permanent-magnet motors under closed-loop control. The main difference is the supply: AC servos are wound for drives fed from mains voltage, while DC servos are wound for low-voltage DC buses. DC servos suit battery and low-voltage machines; AC servos suit higher-power mains machines.
How does battery voltage affect a DC servo motor?
Motor speed is roughly proportional to available voltage, so as a battery discharges the top speed falls. Size the motor at the lowest working battery voltage. Also allow for regenerative energy during braking, which raises bus voltage and must be absorbed by the battery or a braking circuit.
Further reading: How to select a servo motor · How to select a dc motor · Servo and stepper motors
Other dc servo motor series
Spec builder
Specify what you need instead of 35GLT high-performance brush DC
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Portescap 35GLT high-performance brush DC: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.