HMI
Kinco MASS (M2 series) HMI
Kinco's lowest-cost HMI range in 4.3", 7" and 10.1", with one project portable across all three sizes.
Key specifications
| Screen | 4.3-10.1 |
|---|---|
| Resolution | 1024x600 |
| Cpu | 1.0 GHz dual-core |
| Memory | 128MB RAM / 256MB storage |
| Software | DTools 4.0 |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Kinco MASS (M2 series) model codes
Published model codes in the MASS (M2 series) range. Search this page for your part number, or send it to us for availability, pricing and lead time.
| Model code |
|---|
| M2043HE |
| M2070HE |
| M2100E |
Options
- M2043HE
- M2070HE
- M2100E
Typical applications
What a HMI is
An HMI, or human-machine interface, is a touchscreen panel or display that lets operators monitor and control a machine. It communicates with PLCs, drives and controllers over Ethernet or serial links, showing status, alarms, trends and recipes, and sending operator commands. Screens are designed in configuration software with graphics, tags and scripts. Industrial HMIs are built for panel mounting, with front sealing typically to IP65 or higher, and come in a range of screen sizes.
When engineers choose a HMI
Choose an HMI when a machine needs a clear operator interface for settings, alarms, diagnostics and recipes beyond buttons and lamps. It improves usability and reduces panel wiring. The trade-offs are cost, configuration effort and cybersecurity for networked panels. For very simple machines, push buttons and indicator lamps may be enough; for complex plants with many machines, a PC-based SCADA system may be better.
How to specify the Kinco MASS (M2 series)
Send these with your enquiry and an engineer can confirm the right MASS (M2 series) variant:
- Screen size and resolution
- Touch type and environment
- Communication protocols and PLC drivers
- Front panel IP rating
- Remote access and data logging
- Supply voltage
- Configuration software
Common mistakes to avoid
- Choosing a panel without drivers for the PLC
- Ignoring visibility in bright light
- Leaving out user access levels and passwords
- Not securing remote access
Kinco MASS (M2 series): frequently asked questions
What is the Kinco MASS (M2 series)?
Kinco's lowest-cost HMI range in 4.3", 7" and 10.1", with one project portable across all three sizes. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Kinco MASS (M2 series)?
The Kinco MASS (M2 series) is made by Kinco (Kinco Automation) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What model codes are in the Kinco MASS (M2 series) range?
The MASS (M2 series) range includes M2043HE, M2070HE, M2100E. The table on this page lists each published model code with its key figures. Send us the code you use, or the one you need to replace, and our engineers will confirm availability, lead time or the closest equivalent.
What does an HMI do?
An HMI displays machine status, alarms and data, and lets operators enter settings and commands. It connects to PLCs and drives over a network. It replaces many push buttons and indicators with configurable screens, and often adds recipe handling, trending and remote access.
What IP rating should an HMI have?
Panel-mounted HMIs typically have IP65 or higher front protection to resist dust and water jets, while the rear is protected inside the enclosure. In washdown areas, higher ratings or stainless bezels may be required. Check the rating applies when correctly mounted with its gasket.
Further reading: How to select an hmi and remote io · Controllers and PLCs
Often compared with
Engineers specifying this series often compare it with:
Other hmi series
Spec builder
Configure Kinco MASS (M2 series)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Need Kinco MASS (M2 series) or a complete system around it?
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.