HMI
Pro-face ST6000 Series HMI
Mainstream Pro-face HMI in 4 to 15 inch widescreen (up to FWXGA) and 5.7/10.4 inch 4:3 formats, with up to two Ethernet ports and certified versions for ATEX, IECEx, UL Class I Div 2 and marine use.
Key specifications
| Interface | RS-232C, RS-422/485, Ethernet (1–2), USB Type A and micro-B, SD (4:3 models) |
|---|---|
| Display | 4–15 |
| Touch | analogue resistive |
| Approvals | ATEX, IECEx, UL C1D2, EU RO MR, DNV on certified 12.1 inch model |
| Software | GP-Pro EX; BLUE |
Summarised in our own words from Schneider Electric (Schneider Electric Japan Holdings Ltd.)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
IP rating, temperature and supply not stated on the lineup page.
Specify Motion is not affiliated with Schneider Electric (Schneider Electric Japan Holdings Ltd.). Pro-face and ST6000 Series are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Pro-face part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Kinco's lowest-cost HMI range in 4.3", 7" and 10.1", with one project portable across all three sizes.
View MASS (M2 series) →Connected-manufacturing HMI family: G2 high-end quad-core panels to 15.6" and up to 2K, GL2 cost-effective with Wi-Fi/4G, plus GH and IoT GT/GW types.
View GREEN (G2 / GL2 / GH / GT / GW) →Kinco's premium HMI line: quad-core 1.5/1.8 GHz, 1GB/8GB, dual Ethernet, metal housings and up to 15.6" Full HD, including a version with integrated buttons and E-stop.
View FUTURE (F2 series) →Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a HMI is
An HMI, or human-machine interface, is a touchscreen panel or display that lets operators monitor and control a machine. It communicates with PLCs, drives and controllers over Ethernet or serial links, showing status, alarms, trends and recipes, and sending operator commands. Screens are designed in configuration software with graphics, tags and scripts. Industrial HMIs are built for panel mounting, with front sealing typically to IP65 or higher, and come in a range of screen sizes.
When engineers choose a HMI
Choose an HMI when a machine needs a clear operator interface for settings, alarms, diagnostics and recipes beyond buttons and lamps. It improves usability and reduces panel wiring. The trade-offs are cost, configuration effort and cybersecurity for networked panels. For very simple machines, push buttons and indicator lamps may be enough; for complex plants with many machines, a PC-based SCADA system may be better.
How to specify the Pro-face ST6000 Series
Send these with your enquiry and an engineer can confirm the right ST6000 Series variant or an equivalent:
- Screen size and resolution
- Touch type and environment
- Communication protocols and PLC drivers
- Front panel IP rating
- Remote access and data logging
- Supply voltage
- Configuration software
Common mistakes to avoid
- Choosing a panel without drivers for the PLC
- Ignoring visibility in bright light
- Leaving out user access levels and passwords
- Not securing remote access
Pro-face ST6000 Series: frequently asked questions
What is the Pro-face ST6000 Series?
Mainstream Pro-face HMI in 4 to 15 inch widescreen (up to FWXGA) and 5.7/10.4 inch 4:3 formats, with up to two Ethernet ports and certified versions for ATEX, IECEx, UL Class I Div 2 and marine use. It is made by Schneider Electric (Schneider Electric Japan Holdings Ltd.); Specify Motion can help source it or propose an equivalent.
Who makes the Pro-face ST6000 Series?
The Pro-face ST6000 Series is made by Pro-face (Schneider Electric (Schneider Electric Japan Holdings Ltd.)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Schneider Electric (Schneider Electric Japan Holdings Ltd.); brand names are used only to identify the product.
Is there an alternative to the Pro-face ST6000 Series?
Yes. On published figures, Kinco MASS (M2 series) and Kinco GREEN (G2 / GL2 / GH / GT / GW) are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What does an HMI do?
An HMI displays machine status, alarms and data, and lets operators enter settings and commands. It connects to PLCs and drives over a network. It replaces many push buttons and indicators with configurable screens, and often adds recipe handling, trending and remote access.
What IP rating should an HMI have?
Panel-mounted HMIs typically have IP65 or higher front protection to resist dust and water jets, while the rear is protected inside the enclosure. In washdown areas, higher ratings or stainless bezels may be required. Check the rating applies when correctly mounted with its gasket.
Further reading: How to select an hmi and remote io · Controllers and PLCs
Other hmi series
Spec builder
Specify what you need instead of ST6000 Series
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Pro-face ST6000 Series: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.