Closed-loop stepper motor
Leadshine CS-M Series closed-loop stepper motor
2-phase closed-loop stepper motors with built-in incremental encoders that replace the ES-M easy-servo line; brake, IP65 and imperial-shaft versions.
Need this part, a replacement or a complete package? Our experienced UK engineering team helps you select, source and obtain the right products, with pricing, delivery coordination and after-sales support.
Pricing and availability
Get pricing, sourcing and replacement support
Need Leadshine parts, a replacement or a suitable alternative? Send us a part number, or tell us what the machine needs to do. Our UK engineers will come back with the right product, pricing, lead time and delivery, whether that is the original part, a checked alternative or a complete axis.
- Original parts or a checked alternative
- Pricing, lead time and delivery in one reply
- Components, complete axes and ongoing support
No obligation. Add what you know and an engineer will help with the rest. Prefer to configure it? Build a specification.
Spec builder
Configure Leadshine CS-M Series
Select every part you need and answer the questions an applications engineer would ask. Our engineers use your specification to come back with the right products, pricing and lead times. You see your summary before we ask for any details.
Already know the part number? Send it to us directly.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
What are you specifying?
Select everything you need. A motor, drive and gearbox can be specified together as one axis.
Key specifications
| Ingress protection | IP40 standard, IP65 (WP models) |
|---|---|
| Supply | 24-110 VDC via CS drive (model dependent: NEMA17 24/36, NEMA23-24 24/36/48, NEMA34 36/48/70, CS-M234120 48/70/110) |
| Feedback | incremental encoder 1000-line (4000 cpr) or 5000-line (20000 cpr); catalogue also lists 2500 ppr |
| Current (max) | 6 A |
| Holding torque | 0.03–12 Nm |
| NEMA sizes | 8, 11, 17, 23, 24, 34 |
| Step angle | 1.8 ° |
| Speed (max) | 3,000 rpm |
| Rated current range | 1.2-6 |
| Phases | 2 |
| Position accuracy | +/-0.09 deg |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Leadshine CS-M Series replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Leadshine part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
110 mm 2-phase hybrid stepper, 11-33 Nm, for high-torque industrial and CNC axes; pairs with high-voltage AC stepper drives.
| Published maximum | Leadshine CS-M Series | NEMA 42 High Torque (M110STH) |
|---|---|---|
| Holding torque | 12 Nm | 33 Nm meets or exceeds |
| Current | 6 A | 8 A meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Options
- holding brake (B suffix)
- IP65 (WP suffix)
- imperial shaft 6.35/12.7 mm (-S suffix)
Typical applications
What a closed-loop stepper motor is
A closed-loop stepper is a hybrid stepper motor fitted with an encoder and run by a drive that uses the feedback to correct position and adjust current. If the load causes the rotor to lag, the drive detects the error and corrects it rather than losing steps silently. Many drives also reduce current when torque is not needed, lowering heat and noise. The motor keeps the stepper's strong low-speed torque but gains some servo-like behaviour.
When engineers choose a closed-loop stepper motor
Choose a closed-loop stepper when an open-loop stepper is nearly right but missed steps, heat or noise are a concern, such as varying loads, fast indexing or machines that must report a fault. It is typically cheaper and simpler than a servo. The trade-offs are high-speed performance and dynamics: torque still falls at speed, and peak acceleration is lower than a servo. For high-speed, high-dynamic axes, a servo remains better.
How to specify the Leadshine CS-M Series
Send these with your enquiry and an engineer can confirm the right Leadshine CS-M Series variant:
- Holding torque and torque at speed (Nm, rpm)
- Frame size (NEMA or mm)
- Encoder resolution (counts per revolution)
- Drive voltage and current (V, A)
- Control interface: pulse, fieldbus or Ethernet
- Fault outputs and alarm handling
- Brake and IP options
Common mistakes to avoid
- Assuming closed loop gives servo performance at high speed
- Not wiring the drive alarm output to the controller
- Using an encoder resolution the drive does not support
- Ignoring tuning settings for heavy loads
Leadshine CS-M Series: frequently asked questions
Can you help replace Leadshine CS-M Series or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including supply-network options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Leadshine CS-M Series?
2-phase closed-loop stepper motors with built-in incremental encoders that replace the ES-M easy-servo line; brake, IP65 and imperial-shaft versions. Published series figures include current 6 A, holding torque 0.03 Nm, holding torque 12 Nm, step angle 1.8 °. It is available through our supply network, and our engineers can confirm the right variant for your application.
Who makes the Leadshine CS-M Series?
The Leadshine CS-M Series is made by Leadshine (Leadshine Technology) available through our supply network. Send us your requirement for pricing, lead time, datasheets and CAD.
What is the current of the Leadshine CS-M Series?
The published series maximum current is 6 A. Individual models and sizes in the Leadshine CS-M Series range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Leadshine CS-M Series?
We can assess suitable replacement options. On published figures, Motion Control Products NEMA 42 High Torque (M110STH) is options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between a closed-loop stepper and a servo?
Both use feedback, but a closed-loop stepper keeps the stepper's high pole count, giving strong low-speed torque and a stepper-style drive, while a servo motor is optimised for high speed and dynamics. Closed-loop steppers are usually cheaper and simpler to set up; servos usually perform better at high speed.
Do closed-loop steppers run cooler?
Often, yes. Many closed-loop drives reduce current when less torque is needed, while open-loop drives run full current regardless. This lowers motor temperature and noise. The benefit depends on the drive and the load profile, so check the drive's current control mode.
Further reading: Closed loop stepper motors explained · Servo vs stepper · Servo and stepper motors
Often compared with
Engineers specifying this series often compare it with:
Other closed-loop stepper motor series
Engineer support
Need Leadshine CS-M Series or a complete system around it?
Tell us the part or application, quantity and timing. Our UK engineers will come back with the right product, pricing, lead time and delivery.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.
How it works
From enquiry to delivery
Send a part number or describe the application. Our engineers take it from there: the right product, a clear quotation, and delivery and support arranged.
- 01Tell us what you needSend a part number, or configure the application, quantities and timing.
- 02An engineer reviews itWe check the specification and find the original part, a checked equivalent or a complete axis.
- 03Receive your quotationProducts, pricing, lead time and compatibility notes in one reply.
- 04Order and deliveryWhen you are happy, the order is placed and delivery and after-sales support are arranged.