Integrated stepper motor
Trinamic (Analog Devices) PANdrive PD57/60-1378 integrated stepper motor
NEMA 23/24 integrated stepper for 12–48 V with CANopen (CiA 301/402) at up to 1 Mbit/s and closed-loop operation from an external ABN encoder fitted to the motor shaft.
Key specifications
| Voltage (max) | 48 V |
|---|---|
| Data / bus | CANopen (CiA 301 / CiA 402), TMCL |
| Frame sizes | 57, 60 |
| Supply | 12–48 VDC |
| Feedback | external ABN encoder for closed-loop operation |
| NEMA sizes | 23, 24 |
Summarised in our own words from Analog Devices, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Holding torque and current not stated in the firmware manual. Production status not checked.
Specify Motion is not affiliated with Analog Devices, Inc.. Trinamic (Analog Devices) and PANdrive PD57/60-1378 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Trinamic (Analog Devices) part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Open-loop stepper motor with built-in drive, pulse/direction controlled, in NEMA 17, 23 and 24 up to 3.5 Nm.
View Leadshine iEM Series →Open-loop integrated stepper with drive and controller onboard, commanded over Modbus RTU (RS485) with an indexer function.
View Leadshine iEM-RS Series →Closed-loop integrated stepper (motor, 14-bit encoder and drive) with pulse/direction input, NEMA 17-24 up to 3.5 Nm.
View Leadshine iCS Series →Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What an integrated stepper motor is
An integrated stepper motor combines a hybrid stepper, its drive and often a motion controller in a single housing, sometimes with an encoder for closed-loop operation. The unit connects directly to a DC supply and a command interface, which may be pulse and direction, analogue, Modbus, CANopen or industrial Ethernet. Integration removes the separate drive and motor cable, reducing cabinet space and wiring, and some units can store and run simple motion programs on their own.
When engineers choose an integrated stepper motor
Choose an integrated stepper for compact or distributed machines with many small axes, such as format changeover, laboratory automation and small conveyors. Fewer components simplify assembly and reduce wiring faults. The trade-offs are heat and flexibility: electronics on the motor raise local temperature, and the whole unit is replaced on a fault. For high-power steppers or hot environments, separate drives are usually more practical.
How to specify the Trinamic (Analog Devices) PANdrive PD57/60-1378
Send these with your enquiry and an engineer can confirm the right PANdrive PD57/60-1378 variant or an equivalent:
- Holding torque and torque at speed (Nm, rpm)
- Frame size (NEMA or mm)
- Supply voltage (V DC)
- Control interface and protocol
- Open or closed loop
- I/O count and stored program capability
- IP code and ambient temperature (°C)
Common mistakes to avoid
- Mounting in a hot spot and derating the electronics
- Choosing the wrong protocol variant for the controller
- Ignoring cable routing and connector orientation
- Overlooking supply sizing for many axes at once
Trinamic (Analog Devices) PANdrive PD57/60-1378: frequently asked questions
What is the Trinamic (Analog Devices) PANdrive PD57/60-1378?
NEMA 23/24 integrated stepper for 12–48 V with CANopen (CiA 301/402) at up to 1 Mbit/s and closed-loop operation from an external ABN encoder fitted to the motor shaft. Published series figures include voltage 48 V. It is made by Analog Devices, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Trinamic (Analog Devices) PANdrive PD57/60-1378?
The Trinamic (Analog Devices) PANdrive PD57/60-1378 is made by Trinamic (Analog Devices) (Analog Devices, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Analog Devices, Inc.; brand names are used only to identify the product.
What is the voltage of the Trinamic (Analog Devices) PANdrive PD57/60-1378?
The published series maximum voltage is 48 V. Individual models and sizes in the PANdrive PD57/60-1378 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Trinamic (Analog Devices) PANdrive PD57/60-1378?
Yes. On published figures, Leadshine iEM Series and Leadshine iEM-RS Series are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of an integrated stepper motor?
An integrated stepper reduces wiring, cabinet space and assembly time because the drive is built into the motor. It also shortens motor cables, which helps EMC. This suits distributed and modular machines with many small axes. The trade-off is that the electronics share the motor environment.
Can an integrated stepper run without a PLC?
Many integrated steppers can store simple motion programs and respond to digital inputs, so they can run standalone for basic tasks such as indexing or speed control. For coordinated multi-axis machines, a PLC or motion controller usually commands them over a fieldbus.
Further reading: How to select a stepper motor · Closed loop stepper motors explained · Servo and stepper motors
Other integrated stepper motor series
Spec builder
Specify what you need instead of PANdrive PD57/60-1378
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Trinamic (Analog Devices) PANdrive PD57/60-1378: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.