Planetary gearbox
Neugart PLFE economy planetary gearbox with flange output
Economy planetary gearbox with ISO 9409-1 flange output in frames 55 to 110 mm, ratios 3:1 to 100:1 and maximum output torques up to 415 Nm.
Key specifications
| Speed (max) | 18,000 rpm |
|---|---|
| Ingress protection | IP54 |
| Temperature | -25–90 °C |
| Rated torque (max) | 220 Nm |
| Peak torque (max) | 415 Nm |
| Frame sizes | 55, 64, 90, 110 |
| Ratio | 3–100:1 |
| Backlash (max) | 19 arcmin |
| Backlash | <7 to <19 arcmin standard |
| Output | flange output shaft ISO 9409-1 |
Summarised in our own words from Neugart GmbH (Neugart Holding GmbH, family-owned)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Neugart GmbH (Neugart Holding GmbH, family-owned). Neugart and PLFE economy planetary gearbox with flange output are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a Neugart part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
High-rigidity Wanshsin inline planetary with three backlash classes down to super-precision, for machine tools, automation and AGVs.
| Published maximum | PLFE economy planetary gearbox with flange output | WSH |
|---|---|---|
| Rated torque | 220 Nm | 2,400 Nm meets or exceeds |
| Peak torque | 415 Nm | 7,200 Nm meets or exceeds |
| Ratio (max) | 100:1 | 100:1 meets or exceeds |
| Backlash (lower is better) | 19 arcmin | 1.5 arcmin meets or exceeds |
Wanshsin inline planetary designed for high radial loads, offered in three precision classes.
| Published maximum | PLFE economy planetary gearbox with flange output | WTH |
|---|---|---|
| Rated torque | 220 Nm | 2,050 Nm meets or exceeds |
| Peak torque | 415 Nm | 6,150 Nm meets or exceeds |
| Ratio (max) | 100:1 | 100:1 meets or exceeds |
| Backlash (lower is better) | 19 arcmin | 1.5 arcmin meets or exceeds |
Apex Dynamics economy planetary family (PE, PG, PA, PS, PN, PD, PL sub-series) for high-volume automation; standard backlash, inline or right-angle.
| Published maximum | PLFE economy planetary gearbox with flange output | P-II / P-IIR |
|---|---|---|
| Rated torque | 220 Nm | 459 Nm meets or exceeds |
| Peak torque | 415 Nm | — |
| Ratio (max) | 100:1 | 1,000:1 meets or exceeds |
| Backlash (lower is better) | 19 arcmin | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a planetary gearbox is
A planetary gearbox reduces speed and multiplies torque using a central sun gear driven by the motor, several planet gears on a carrier, and an outer ring gear. Load is shared between the planets, so the gearbox is compact, coaxial and torque-dense. A single stage typically gives ratios of about 3:1 to 10:1, and stages are combined for higher ratios. Precision servo planetaries use ground helical or spur gears, preloaded output bearings and a motor adapter flange, with backlash typically a few arcminutes or less.
When engineers choose a planetary gearbox
Choose a planetary gearbox for most servo and stepper axes that need more torque, lower reflected inertia or a better inertia match. It is efficient, typically above 95% per stage, stiff and widely available in standard frames. The trade-offs are backlash, which is low but not zero, and limited single-stage ratio. For zero backlash in a compact joint, a strain-wave gear suits better. For very high shock loads, a cycloidal reducer may be more robust.
How to specify the Neugart PLFE economy planetary gearbox with flange output
Send these with your enquiry and an engineer can confirm the right PLFE economy planetary gearbox with flange output variant or an equivalent:
- Ratio and output speed (:1, rpm)
- Nominal and peak output torque (Nm)
- Emergency stop torque (Nm)
- Backlash (arcmin) and torsional stiffness (Nm/arcmin)
- Radial and axial output loads (N)
- Motor flange, shaft diameter and length (mm)
- Duty cycle, mounting orientation and lubrication
Common mistakes to avoid
- Sizing on motor torque times ratio without checking acceleration torque and service factors
- Ignoring the input speed limit at high motor speeds
- Mounting a pulley or pinion that overloads the output bearing
- Forgetting the gearbox efficiency and heat in continuous duty
Neugart PLFE economy planetary gearbox with flange output: frequently asked questions
What is the Neugart PLFE economy planetary gearbox with flange output?
Economy planetary gearbox with ISO 9409-1 flange output in frames 55 to 110 mm, ratios 3:1 to 100:1 and maximum output torques up to 415 Nm. Published series figures include speed 18,000 rpm, temperature -25 °C, temperature 90 °C, rated torque 220 Nm. It is made by Neugart GmbH (Neugart Holding GmbH, family-owned); Specify Motion can help source it or propose an equivalent.
Who makes the Neugart PLFE economy planetary gearbox with flange output?
The Neugart PLFE economy planetary gearbox with flange output is made by Neugart (Neugart GmbH (Neugart Holding GmbH, family-owned)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Neugart GmbH (Neugart Holding GmbH, family-owned); brand names are used only to identify the product.
What is the speed of the Neugart PLFE economy planetary gearbox with flange output?
The published series maximum speed is 18,000 rpm. Individual models and sizes in the PLFE economy planetary gearbox with flange output range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Neugart PLFE economy planetary gearbox with flange output?
Yes. On published figures, Wanshsin WSH and Wanshsin WTH are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
How do I choose a planetary gearbox ratio?
Start from the load speed and motor speed range, then check inertia matching and torque. A ratio that brings the reflected load inertia close to the motor inertia improves dynamics. Then confirm peak output torque during acceleration is within the gearbox rating and that input speed stays under the limit.
What backlash does a precision planetary gearbox have?
Precision servo planetary gearboxes typically have backlash from below one arcminute to several arcminutes, depending on grade and stages. Lower backlash costs more. For most positioning axes, a few arcminutes is fine; for robot joints or optics, strain-wave or zero-backlash designs are used.
Further reading: How to select a planetary gearbox · Harmonic vs planetary vs cycloidal · Gearboxes and harmonic drives
Other planetary gearbox series
Spec builder
Specify what you need instead of PLFE economy planetary gearbox with flange output
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Neugart PLFE economy planetary gearbox with flange output: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.