PCB-mount drive
MAB Robotics MD80 brushless controller PCB-mount drive
Ø55 mm FOC controller for brushless motors, 10 to 48 V DC, 20 A continuous and 80 A peak (2 s) phase current, 14-bit on-board absolute encoder and FDCAN at up to 8 Mbps, with impedance and torque loops at 40 kHz.
Key specifications
| Voltage (max) | 48 V |
|---|---|
| Outer diameter (max) | 55 mm |
| Data / bus | CAN FD (1/2/5/8 Mbps), CANopen |
| Supply | 10–48 V DC (24–42 V nominal) |
| Feedback | 14-bit absolute encoder; SPI and RS422 output-encoder inputs |
| Continuous current (max) | 20 A |
| Peak current (max) | 80 A |
| Control rate | torque/impedance 40 kHz, velocity 5 kHz, position 1 kHz |
Summarised in our own words from MAB Robotics Sp. z o.o.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Hardware V3.0 and later. A smaller Ø35 mm MD-series controller with 20 A peak is listed but not named on the series page.
Specify Motion is not affiliated with MAB Robotics Sp. z o.o.. MAB Robotics and MD80 brushless controller are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a MAB Robotics part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
ADVANCED Motion Controls' ultra-compact, high power-density digital servo drives for 10-90 VDC systems, up to 100 A continuous and 200 A peak. They come in PCB, machine-embedded, panel and development-board formats, carry STO as standard, and run EtherCAT, CANopen or Ethernet/IP. Extended-environment models are rated -40 to +95 C.
| Published maximum | MD80 brushless controller | FlexPro Digital Servo Drives (FE, FX, … |
|---|---|---|
| Continuous current | 20 A | 100 A meets or exceeds |
| Peak current | 80 A | 200 A meets or exceeds |
Novanta's ultra-compact, power-dense servo drive for 8-72 VDC: 45 A continuous, 60 A peak, up to 5 kW, with a 75 kHz current loop. It comes as an SPI core module, a PCB-mount EtherCAT/CANopen board or a connectorised XCR unit, for cobot joints, humanoids and unmanned vehicles.
| Published maximum | MD80 brushless controller | Everest Servo Drives (EVE-CORE, EVE-NE… |
|---|---|---|
| Continuous current | 20 A | 45 A meets or exceeds |
| Peak current | 80 A | 60 A |
| Power | — | 5,000 W |
| Axes | — | 1 |
Leadshine's EL7 platform spans 220 VAC drives from 400 W to 2 kW, 400 VAC drives to 7.5 kW and an 11-22 kW high-power range, all with STO and EtherCAT, Modbus/pulse or PROFINET variants.
| Published maximum | MD80 brushless controller | EL7S / EL7 Series AC Servo Drives |
|---|---|---|
| Continuous current | 20 A | 44 A meets or exceeds |
| Peak current | 80 A | 88 A meets or exceeds |
| Power | — | 22,000 W |
| Axes | — | 1 |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a PCB-mount drive is
A PCB-mount servo drive is a compact servo drive module designed to be soldered or plugged into a host circuit board, rather than mounted in a cabinet. It contains the power stage and control loops for brushless, brushed or stepper-style motors, with interfaces such as CANopen, EtherCAT, SPI or analogue. Some versions are supplied with evaluation or carrier boards. Very high power density lets them fit inside robots, medical devices and instruments.
When engineers choose a PCB-mount drive
Choose a PCB-mount drive when the motor control must be embedded in the product, such as surgical robots, exoskeletons, AGVs, drones and laboratory instruments. It saves space and weight and integrates with the host board. The trade-offs are design responsibility and thermal management: the host board must provide heatsinking, connectors, EMC and protection. For machines with space for cabinets, packaged drives are simpler.
How to specify the MAB Robotics MD80 brushless controller
Send these with your enquiry and an engineer can confirm the right MD80 brushless controller variant or an equivalent:
- Supply voltage (V DC)
- Continuous and peak current (A)
- Motor and feedback type
- Interface: CANopen, EtherCAT, SPI or analogue
- Size and mounting (mm)
- Thermal path and heatsinking
- Safety functions and approvals
Common mistakes to avoid
- Ignoring the thermal path on the host board
- Not designing EMC filtering and protection
- Assuming evaluation board performance in a sealed product
- Leaving out testing for safety and medical approvals
MAB Robotics MD80 brushless controller: frequently asked questions
What is the MAB Robotics MD80 brushless controller?
Ø55 mm FOC controller for brushless motors, 10 to 48 V DC, 20 A continuous and 80 A peak (2 s) phase current, 14-bit on-board absolute encoder and FDCAN at up to 8 Mbps, with impedance and torque loops at 40 kHz. Published series figures include voltage 48 V, outer diameter 55 mm, continuous current 20 A, peak current 80 A. It is made by MAB Robotics Sp. z o.o.; Specify Motion can help source it or propose an equivalent.
Who makes the MAB Robotics MD80 brushless controller?
The MAB Robotics MD80 brushless controller is made by MAB Robotics (MAB Robotics Sp. z o.o.) and is listed here for engineers comparing options. Specify Motion is not affiliated with MAB Robotics Sp. z o.o.; brand names are used only to identify the product.
What is the voltage of the MAB Robotics MD80 brushless controller?
The published series maximum voltage is 48 V. Individual models and sizes in the MD80 brushless controller range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the MAB Robotics MD80 brushless controller?
Yes. On published figures, ADVANCED Motion Controls FlexPro Digital Servo Drives (FE, FX, FM, FD, FMP; Micro and Mini sizes) and Novanta Everest Servo Drives (EVE-CORE, EVE-NET, EVE-XCR) - Summit Series are the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the benefit of a PCB-mount servo drive?
A PCB-mount drive puts motor control inside the product, saving space, weight and cabling. It integrates with the host electronics and can be very power-dense. The host board designer takes on thermal, EMC and protection design, so evaluation boards are often used first.
How is heat removed from a PCB-mount drive?
Heat is usually conducted through the drive's base or pins into the host board and a heatsink or chassis. Copper area, thermal interface materials and airflow all matter. Continuous current ratings often assume specific heatsinking, so check the conditions in the datasheet.
Further reading: How to select a pcb mount servo drive · How to select a servo drive · Servo drives
Other pcb-mount drive series
Spec builder
Specify what you need instead of MD80 brushless controller
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the MAB Robotics MD80 brushless controller: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.