Optical absolute encoder
Kübler Sendix F5868 / F5888 optical absolute encoder
Gearless multi-turn absolute encoder using Kübler's Intelligent Scan Technology on one OptoASIC, with up to 16-bit single-turn plus 16-bit multi-turn (32 bits total), 12,000 rpm, IP65/IP67 and Safety-Lock bearings.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Kübler parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Sendix F5868 / F5888
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Speed (max) | 12,000 rpm |
|---|---|
| Ingress protection | IP65 / IP67 |
| Temperature | -40–80 °C |
| Data / bus | Modbus RTU |
| Supply | 10–30 V DC |
| Resolution (max) | 32 bit |
| Resolution | up to 16 bit single-turn + 16 bit multi-turn |
| Housing | 58 |
| Shaft | solid shaft up to 10 mm; hollow shaft up to 15 mm mentioned |
| Multiturn | gearless, magnetically insensitive |
Summarised in our own words from Fritz Kübler GmbH (Kübler Group, family-owned)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Notes on this data
Figures read from the Modbus RTU version; other interface versions exist but were not read.
Specify Motion is not affiliated with Fritz Kübler GmbH (Kübler Group, family-owned). Kübler and Sendix F5868 / F5888 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Kübler Sendix F5868 / F5888 replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Kübler part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Multi-turn absolute hollow-shaft capacitive encoder that holds position through power loss, so no re-homing.
| Published maximum | Sendix F5868 / F5888 | VLM |
|---|---|---|
| Resolution | 32 bit | 32 bit meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an optical absolute encoder is
An optical absolute encoder reads a unique code pattern on a disc or scale, so every position has its own digital value and position is known immediately at power-up. Single-turn encoders give position within one revolution; multi-turn encoders also count revolutions using gears or electronic counters. Position is sent over a serial interface such as SSI or BiSS, a manufacturer-specific protocol, or a fieldbus. Optical scanning gives high resolution, typically 17 bits per revolution or more in servo encoders, and good accuracy.
When engineers choose an optical absolute encoder
Choose an optical absolute encoder where knowing position at power-up matters, such as robots, machine tools, multi-axis machines and axes that cannot be homed safely. It removes homing routines and supports safety functions. The trade-offs are cost, interface compatibility and contamination sensitivity. Battery-backed multi-turn types need battery maintenance; gear or energy-harvesting types avoid that. In very dirty environments, magnetic or inductive absolute encoders may suit better.
How to specify the Kübler Sendix F5868 / F5888
Send these with your enquiry and an engineer can confirm the right Sendix F5868 / F5888 variant or an equivalent:
- Single-turn resolution (bits)
- Multi-turn range (revolutions)
- Interface: SSI, BiSS, proprietary serial or fieldbus
- Accuracy (arcsec)
- Shaft or hollow shaft size (mm)
- Speed (rpm)
- Environment and safety rating
Common mistakes to avoid
- Choosing an interface the drive does not support
- Forgetting battery maintenance on battery-backed multi-turn types
- Confusing resolution with accuracy
- Ignoring cable length limits for serial interfaces
Kübler Sendix F5868 / F5888: frequently asked questions
Can you help replace Kübler Sendix F5868 / F5888 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Kübler Sendix F5868 / F5888?
Gearless multi-turn absolute encoder using Kübler's Intelligent Scan Technology on one OptoASIC, with up to 16-bit single-turn plus 16-bit multi-turn (32 bits total), 12,000 rpm, IP65/IP67 and Safety-Lock bearings. Published series figures include speed 12,000 rpm, temperature -40 °C, temperature 80 °C, resolution 32 bit. It is made by Fritz Kübler GmbH (Kübler Group, family-owned); Specify Motion can help source it or propose an equivalent.
Who makes the Kübler Sendix F5868 / F5888?
The Kübler Sendix F5868 / F5888 is made by Kübler (Fritz Kübler GmbH (Kübler Group, family-owned)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Fritz Kübler GmbH (Kübler Group, family-owned); brand names are used only to identify the product.
What is the speed of the Kübler Sendix F5868 / F5888?
The published series maximum speed is 12,000 rpm. Individual models and sizes in the Sendix F5868 / F5888 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Kübler Sendix F5868 / F5888?
We can assess suitable replacement options. On published figures, Netzer Precision VLM is options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
What is the difference between single-turn and multi-turn absolute encoders?
A single-turn absolute encoder knows its angle within one revolution. A multi-turn absolute encoder also counts complete revolutions, so it knows total position over many turns even after power loss. Multi-turn encoders avoid homing on axes driven through screws or gears.
Which interface should an absolute encoder use?
Use the interface supported by the drive or controller. SSI is simple and widely supported, BiSS-C is an open bidirectional protocol, and several manufacturer-specific protocols are common on machine tools and servo drives. Fieldbus encoders suit PLC networks. Check cable lengths and update rates for the control loop.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical absolute encoder series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Kübler Sendix F5868 / F5888: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.