Optical absolute encoder
Hengstler ACURO AC58 optical absolute encoder
58 mm industrial absolute encoder in single-turn and multi-turn versions with up to 34 bits total (22-bit single-turn, 12-bit multi-turn, depending on interface) and one of the widest interface choices in the class, from SSI and BiSS to EtherCAT and PROFINET.
Key specifications
| Ingress protection | up to IP67 (EtherCAT version) |
|---|---|
| Temperature | -40–100 °C |
| Data / bus | SSI, BiSS, EtherCAT, PROFINET, PROFIBUS, CANopen, CAN layer 2, DeviceNet, Interbus, SUCOnet |
| Resolution (max) | 34 bit |
| Resolution | up to 22 bit single-turn + 12 bit multi-turn, depending on interface |
| Housing | 58 |
| Length | 50 |
| Ethercat cycle us | 62.5 |
| Housing | stainless steel housing available as an option (EtherCAT version) |
Summarised in our own words from Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar)'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
Temperature range is from the product page for part AC58/1214EF.42VDZ; the EtherCAT news page gives IP67. Sensing principle not stated on the pages read; Hengstler cites its own Opto-ASIC technology.
Specify Motion is not affiliated with Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar). Hengstler and ACURO AC58 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Hengstler ACURO AC58 itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing ACURO AC58 and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
What an optical absolute encoder is
An optical absolute encoder reads a unique code pattern on a disc or scale, so every position has its own digital value and position is known immediately at power-up. Single-turn encoders give position within one revolution; multi-turn encoders also count revolutions using gears or electronic counters. Position is sent over a serial interface such as SSI or BiSS, a manufacturer-specific protocol, or a fieldbus. Optical scanning gives high resolution, typically 17 bits per revolution or more in servo encoders, and good accuracy.
When engineers choose an optical absolute encoder
Choose an optical absolute encoder where knowing position at power-up matters, such as robots, machine tools, multi-axis machines and axes that cannot be homed safely. It removes homing routines and supports safety functions. The trade-offs are cost, interface compatibility and contamination sensitivity. Battery-backed multi-turn types need battery maintenance; gear or energy-harvesting types avoid that. In very dirty environments, magnetic or inductive absolute encoders may suit better.
How to specify the Hengstler ACURO AC58
Send these with your enquiry and an engineer can confirm the right ACURO AC58 variant or an equivalent:
- Single-turn resolution (bits)
- Multi-turn range (revolutions)
- Interface: SSI, BiSS, proprietary serial or fieldbus
- Accuracy (arcsec)
- Shaft or hollow shaft size (mm)
- Speed (rpm)
- Environment and safety rating
Common mistakes to avoid
- Choosing an interface the drive does not support
- Forgetting battery maintenance on battery-backed multi-turn types
- Confusing resolution with accuracy
- Ignoring cable length limits for serial interfaces
Hengstler ACURO AC58: frequently asked questions
What is the Hengstler ACURO AC58?
58 mm industrial absolute encoder in single-turn and multi-turn versions with up to 34 bits total (22-bit single-turn, 12-bit multi-turn, depending on interface) and one of the widest interface choices in the class, from SSI and BiSS to EtherCAT and PROFINET. Published series figures include temperature -40 °C, temperature 100 °C, resolution 34 bit. It is made by Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar); Specify Motion can help source it or propose an equivalent.
Who makes the Hengstler ACURO AC58?
The Hengstler ACURO AC58 is made by Hengstler (Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar)) and is listed here for engineers comparing options. Specify Motion is not affiliated with Ralliant Corporation (Hengstler GmbH, part of Hengstler-Dynapar); brand names are used only to identify the product.
What is the temperature of the Hengstler ACURO AC58?
The published series minimum temperature is -40 °C. Individual models and sizes in the ACURO AC58 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Hengstler ACURO AC58?
Yes. Our engineers can propose an equivalent built around your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
What is the difference between single-turn and multi-turn absolute encoders?
A single-turn absolute encoder knows its angle within one revolution. A multi-turn absolute encoder also counts complete revolutions, so it knows total position over many turns even after power loss. Multi-turn encoders avoid homing on axes driven through screws or gears.
Which interface should an absolute encoder use?
Use the interface supported by the drive or controller. SSI is simple and widely supported, BiSS-C is an open bidirectional protocol, and several manufacturer-specific protocols are common on machine tools and servo drives. Fieldbus encoders suit PLC networks. Check cable lengths and update rates for the control loop.
Further reading: Absolute vs incremental encoders · How to select an encoder · Encoders and feedback
Other optical absolute encoder series
Spec builder
Specify what you need instead of ACURO AC58
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Hengstler ACURO AC58: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.