AC servo drive
Aerotech Automation1 iXC6e high-power PWM servo drive with controller
Single-axis high-power PWM servo drive with built-in controller, up to 100 A peak / 50 A continuous at a 680 VDC bus, 20 kHz loops, EtherCAT/EtherNet/IP/Modbus TCP and STO to SIL 3 / PL e.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Aerotech parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of Automation1 iXC6e high-power PWM servo drive with controller
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Voltage (max) | 680 V |
|---|---|
| Supply | 240 or 480 VAC three-phase motor supply; 100-240 VAC control |
| Feedback | square-wave, sine-wave x65,536, BiSS C, EnDat 2.1/2.2 |
| Fieldbus | EtherCAT, EtherNet/IP, Modbus TCP, TCP socket, HyperWire |
| Axes | 1 (up to 12 with iSMC over HyperWire) |
| Continuous current (max) | 50 A |
| Peak current (max) | 100 A |
| Safe torque off | SIL 3 / PL e / Cat 4 |
Summarised in our own words from Aerotech, Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1
Specify Motion is not affiliated with Aerotech, Inc.. Aerotech and Automation1 iXC6e high-power PWM servo drive with controller are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Aerotech Automation1 iXC6e high-power PWM servo drive with controller replacement and alternative options
Use these supply-network options as a starting point for an engineering check. We can also help source the original Aerotech part. Published series figures do not establish an exact-model or drop-in replacement: confirm ratings, fit, interfaces and approvals for your application.
Network-capable AMC digital drives spanning 10-747 VDC and 120-480 VAC, up to 150 A continuous and 250 A peak (27.4 kW peak power), in PCB, panel, machine and vehicle formats. They support almost any motor type and feedback, plus CANopen, EtherCAT, POWERLINK and Modbus.
| Published maximum | Automation1 iXC6e high-power PWM servo drive with controller | DigiFlex Performance Servo Drives (DP,… |
|---|---|---|
| Continuous current | 50 A | 150 A meets or exceeds |
| Peak current | 100 A | 250 A meets or exceeds |
| Power | — | 27,400 W |
AMC's analogue servo drives for centralised control schemes: set up with DIP switches and potentiometers, commanded by +/-10 V or PWM. They span 10-400 VDC and 45-265 VAC, up to 150 A continuous and 250 A peak, in PCB, panel and vehicle formats. PCB extended-environment parts run -40 to +85 C.
| Published maximum | Automation1 iXC6e high-power PWM servo drive with controller | AxCent Analogue Servo Drives (AB, AZ, … |
|---|---|---|
| Continuous current | 50 A | 150 A meets or exceeds |
| Peak current | 100 A | 250 A meets or exceeds |
ADVANCED Motion Controls' ultra-compact, high power-density digital servo drives for 10-90 VDC systems, up to 100 A continuous and 200 A peak. They come in PCB, machine-embedded, panel and development-board formats, carry STO as standard, and run EtherCAT, CANopen or Ethernet/IP. Extended-environment models are rated -40 to +95 C.
| Published maximum | Automation1 iXC6e high-power PWM servo drive with controller | FlexPro Digital Servo Drives (FE, FX, … |
|---|---|---|
| Continuous current | 50 A | 100 A meets or exceeds |
| Peak current | 100 A | 200 A meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Typical applications
What an AC servo drive is
An AC servo drive, or servo amplifier, powers and controls a servo motor from mains supply. It rectifies the AC input to a DC bus, then uses an inverter of power transistors switched by PWM to produce controlled three-phase current in the motor. Nested current, velocity and position loops use encoder feedback to follow commands from pulse and direction, analogue or industrial Ethernet. Modern drives add auto-tuning, vibration suppression and safety functions such as safe torque off.
When engineers choose an AC servo drive
Choose an AC servo drive for mains-powered machines with servo axes from tens of watts to many kilowatts, such as packaging, machine tools and robotics. It gives precise, dynamic control with standard industrial interfaces. The trade-offs are cabinet space, wiring, EMC measures and the need to match motor and feedback. For low-voltage or mobile machines, a DC drive is more suitable; for many axes in one cabinet, a multi-axis drive may save space.
How to specify the Aerotech Automation1 iXC6e high-power PWM servo drive with controller
Send these with your enquiry and an engineer can confirm the right Automation1 iXC6e high-power PWM servo drive with controller variant or an equivalent:
- Supply voltage and phases (V AC)
- Continuous and peak output current (A rms)
- Motor and feedback compatibility
- Command interface: pulse, analogue, EtherCAT, PROFINET and so on
- Safety functions, such as STO, and their rating (SIL, PL)
- Braking resistor and regenerative energy (W, J)
- Ambient temperature, mounting and cooling
Common mistakes to avoid
- Sizing on motor rated current without the drive's peak duration
- Ignoring regenerative energy on fast decelerations or vertical axes
- Leaving out EMC filtering and screened motor cables
- Mixing motor and encoder types the drive does not support
Aerotech Automation1 iXC6e high-power PWM servo drive with controller: frequently asked questions
Can you help replace Aerotech Automation1 iXC6e high-power PWM servo drive with controller or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Aerotech Automation1 iXC6e high-power PWM servo drive with controller?
Single-axis high-power PWM servo drive with built-in controller, up to 100 A peak / 50 A continuous at a 680 VDC bus, 20 kHz loops, EtherCAT/EtherNet/IP/Modbus TCP and STO to SIL 3 / PL e. Published series figures include voltage 680 V, continuous current 50 A, peak current 100 A. It is made by Aerotech, Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Aerotech Automation1 iXC6e high-power PWM servo drive with controller?
The Aerotech Automation1 iXC6e high-power PWM servo drive with controller is made by Aerotech (Aerotech, Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Aerotech, Inc.; brand names are used only to identify the product.
What is the voltage of the Aerotech Automation1 iXC6e high-power PWM servo drive with controller?
The published series maximum voltage is 680 V. Individual models and sizes in the Automation1 iXC6e high-power PWM servo drive with controller range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Aerotech Automation1 iXC6e high-power PWM servo drive with controller?
We can assess suitable replacement options. On published figures, ADVANCED Motion Controls DigiFlex Performance Servo Drives (DP, DZ, DV) and ADVANCED Motion Controls AxCent Analogue Servo Drives (AB, AZ, AV, B, AVB) are options to assess from our supply network. An engineer confirms the fit against your application before recommending anything.
Does a servo drive need a braking resistor?
When a servo motor decelerates, it acts as a generator and returns energy to the drive's DC bus. If the bus capacitors cannot absorb it, the voltage rises and the drive trips. A braking resistor dissipates the energy as heat. Fast decelerations, high inertia and vertical axes usually need one.
What is safe torque off on a servo drive?
Safe torque off, or STO, is a safety function that removes power that could produce torque at the motor, without disconnecting the drive supply. It is defined in IEC 61800-5-2 and used as part of a machine's safety system. Check the safety level achieved and wiring requirements.
Further reading: How to select a servo drive · How to select a servo motor · Servo drives
Other ac servo drive series
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Aerotech Automation1 iXC6e high-power PWM servo drive with controller: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.