AC servo drive
Siemens SINAMICS S200
Single-axis servo drive for the 1FL2 motor, offered as Basic and Standard versions with pulse-train or PROFINET control.
Key specifications
| Power | 100–7,000 W |
|---|---|
| Supply | 1/3 AC 200-240 V (0.1-1 kW); 3 AC 380-480 V (0.2-7 kW, Standard only) |
| Fieldbus | PROFINET RT/IRT, pulse train (PTI) |
| Axes | 1 |
| Safety | STO and SS1-t via terminals, SIL 3 / PL e (Standard version) |
Summarised in our own words from Siemens AG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
Current ratings not published on pages checked. Overview PDF also mentions Modbus RTU/USS but table alignment unclear - not included in fieldbus list. Speed controller cycle 125 us.
Specify Motion is not affiliated with Siemens AG. Siemens and SINAMICS S200 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Alternatives that meet or exceed these figures
Engineers often come to us with a Siemens part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Leadshine's EL7 platform spans 220 VAC drives from 400 W to 2 kW, 400 VAC drives to 7.5 kW and an 11-22 kW high-power range, all with STO and EtherCAT, Modbus/pulse or PROFINET variants.
| Published maximum | SINAMICS S200 | EL7S / EL7 Series AC Servo Drives |
|---|---|---|
| Continuous current | — | 44 A |
| Peak current | — | 88 A |
| Power | 7,000 W | 22,000 W meets or exceeds |
| Axes | 1 | 1 meets or exceeds |
The second-generation Kinco JD drive, paired with SMK motors from 50 W to 7.5 kW. It accepts a very wide range of encoder protocols plus a second encoder, runs CANopen or EtherCAT, and has STO SIL3 / PL e on every model.
| Published maximum | SINAMICS S200 | JD2 Series AC Servo Drives |
|---|---|---|
| Continuous current | — | 26 A |
| Peak current | — | 65 A |
| Power | 7,000 W | 7,500 W meets or exceeds |
| Axes | 1 | 1 meets or exceeds |
Kinco's high-performance AC servo drive covering 200 W to 7.5 kW on 220 or 400 V class supplies, with full closed loop, multi-axis synchronisation, vibration suppression and SIL3 STO on selected models.
| Published maximum | SINAMICS S200 | JD Series AC Servo Drives (JD430/620/6… |
|---|---|---|
| Power | 7,000 W | 7,500 W meets or exceeds |
| Axes | 1 | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other ac servo drive series
Spec builder
Specify what you need instead of SINAMICS S200
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Siemens SINAMICS S200: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.