AC servo drive
Kinco JD2 Series AC Servo Drives
The second-generation Kinco JD drive, paired with SMK motors from 50 W to 7.5 kW. It accepts a very wide range of encoder protocols plus a second encoder, runs CANopen or EtherCAT, and has STO SIL3 / PL e on every model.
Key specifications
| Ingress protection | IP20 |
|---|---|
| Power | 50–7,500 W |
| Supply | 1ph/3ph 200-240 VAC; 3ph 380-440 VAC (logic 18-30 VDC) |
| Feedback | TTL incremental (with/without Hall), SmartABS, BiSS-B/C, EnDat, Nikon A-format, Hiperface (option), SinCos 1 Vpp (option), Resolver (option), Second encoder input |
| Fieldbus | CANopen (1 Mbps), EtherCAT CoE, Profinet (named; no model code), Pulse/direction up to 8 MHz |
| Axes | 1 |
| Continuous current (max) | 26 A |
| Peak current (max) | 65 A |
| Safe torque off | SIL3 (IEC 61508), PL e Cat.3 |
Series ranges as published; individual models vary. The full datasheet, drawings and CAD models are available on request.
Options
- Dual-encoder closed loop
- Brake output 24 VDC 1 A
Typical applications
Often compared with
Engineers specifying this series often compare it with:
Other ac servo drive series
Spec builder
Configure Kinco JD2 Series AC Servo Drives
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Need Kinco JD2 Series AC Servo Drives or a complete system around it?
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.