Through-bore slip rings
Moog AC6815 through-bore slip ring
High circuit-count through-bore slip ring with up to 128 circuits and gold bifurcated brushes. Supports 10/100/1000BaseT Ethernet.
Need this part, a replacement or a better-fit option? Our engineers help with selection, procurement, sourcing, competitive pricing and lead times.
Engineering support · Product sourcing · Procurement
Get pricing or a checked replacement
Need Moog parts, a replacement or another suitable option? Send your part number or describe the application. We’ll review the requirement and help with product selection, sourcing, pricing and lead times.
- Exact parts and engineer-checked alternatives
- Manufacturer-direct options where available
- Standard, modified and custom solutions
No obligation to buy. Have a datasheet, drawing or nameplate photo? Reply to your confirmation email to attach it.
Need help choosing? Build a specification →Need help choosing? Open the specification builder
Spec builder
Specify what you need instead of AC6815
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Key specifications
| Circuits (max) | 128 |
|---|---|
| Current per circuit (max) | 10 A |
| Voltage (max) | 220 V |
| Speed (max) | 250 rpm |
| Bore | 38.1–38.1 mm |
| Outer diameter | 109.7–109.7 mm |
| Temperature (max) | 80 °C |
| Data / bus | 10BaseT, 100BaseT, 1000BaseT |
Summarised in our own words from Moog Inc.'s published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3
Notes on this data
Currents 2/3.5/10 A at 60/110/220 VAC.
Specify Motion is not affiliated with Moog Inc.. Moog and AC6815 are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Moog AC6815 itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing AC6815 and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Typical applications
What a through-bore slip ring is
A through-bore slip ring is a rotary electrical joint built around a hollow centre, so a drive shaft, pneumatic or hydraulic line, fibre or cable bundle can pass straight through it. The rings are mounted on an insulated sleeve that fits over or around the machine shaft, and the brush blocks sit outside them in a stationary housing. Power, signal and data circuits are combined in one unit, while the bore keeps the rotation axis available for mechanics or services. Bore sizes range from a few millimetres to hundreds of millimetres.
When engineers choose a through-bore slip ring
Engineers choose a through-bore design when the axis of rotation is already occupied, typically by a shaft, a rotary union or a cable that must stay continuous. It is the standard choice for indexing tables, wrapping machines and turntables built around a central column. The trade-off is that larger rings mean higher surface speed, more brush wear and more drag torque at the same rpm, and the unit is bigger than a capsule. Where axial length is the constraint rather than diameter, a pancake design may suit better.
How to specify the Moog AC6815
Send these with your enquiry and an engineer can confirm the right AC6815 variant or an equivalent:
- Bore diameter and shaft tolerance (mm)
- Outer diameter and length limits (mm)
- Circuit count and current per circuit (A)
- Working voltage and any high-voltage isolation (V)
- Speed, continuous and peak (rpm)
- Data or bus protocols to pass, such as Ethernet, CAN or PROFINET
- Sealing (IP code), temperature (°C) and mounting method
Common mistakes to avoid
- Sizing the bore to the shaft only, with no allowance for a rotary union or cables that must also pass
- Mounting the rotor hard on a shaft with radial runout and a separate stator fixing, so the unit is forced to align two axes
- Forgetting that surface speed rises with diameter, so the rated rpm is lower for larger bores
- Not stating which circuits need screening or twisted pairs for encoder and fieldbus signals
Moog AC6815: frequently asked questions
Can you help replace Moog AC6815 or source the original?
Send the full model code, quantity and required date. Our engineers can check original-part availability and assess suitable alternatives, including Motion Control Products options where appropriate. We confirm compatibility and any changes needed before recommending a replacement.
What is the Moog AC6815?
High circuit-count through-bore slip ring with up to 128 circuits and gold bifurcated brushes. Supports 10/100/1000BaseT Ethernet. Published series figures include circuits 128, current per circuit 10 A, voltage 220 V, speed 250 rpm. It is made by Moog Inc.; Specify Motion can help source it or propose an equivalent.
Who makes the Moog AC6815?
The Moog AC6815 is made by Moog (Moog Inc.) and is listed here for engineers comparing options. Specify Motion is not affiliated with Moog Inc.; brand names are used only to identify the product.
What is the circuits of the Moog AC6815?
The published series maximum circuits is 128. Individual models and sizes in the AC6815 range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the Moog AC6815?
We can assess suitable replacement options. Our engineers can review the original model and propose options for your load, speed and environment. An engineer confirms the fit against your application before recommending anything.
How do I choose the bore size for a through-bore slip ring?
Start with the shaft diameter and its tolerance, then add anything else that must pass through the centre, such as hoses, a rotary union stem or a fibre. Allow clearance for assembly and for the insulating sleeve. Larger bores raise surface speed, cost and drag torque, so pick the smallest bore that genuinely clears what has to pass through.
Can a through-bore slip ring carry Ethernet as well as power?
Yes. Many through-bore units combine power rings with signal rings designed for industrial Ethernet, using controlled impedance, twisted-pair routing and screening between groups. State the protocol and speed, typically 100 Mbit/s or gigabit, so the supplier can allocate suitable rings and keep them away from motor power. For very high data rates, a contactless or fibre channel may be added.
Further reading: How to select a slip ring · Ethernet through slip rings · Slip rings
Other through-bore slip rings series
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Moog AC6815: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.