Multi-axis servo drive
SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter multi-axis servo drive
Cabinet-mounted multi-axis system of supply modules (10 to 110 kW) with single-axis modules from 2 to 180 A and double-axis modules from 2 to 8 A, 250 % overload and built-in STO to PL e / SIL 3.
Key specifications
| Power (max) | 110,000 W |
|---|---|
| Supply | 3 x AC 380-500 V |
| Feedback | optional multi-encoder input; EtherCAT encoder interface option card |
| Fieldbus | EtherCAT (CiA402 profile variant) |
| Axes | single- and double-axis modules |
| Continuous current (max) | 180 A |
| Safety | 15+ further functions via MOVISAFE CS..A cards, PROFIsafe and Safety over EtherCAT |
| Safe torque off | STO PL e / SIL 3, 2 ms response |
| Overload | 250 % |
Summarised in our own words from SEW-EURODRIVE GmbH & Co KG's published data; series maxima, individual models vary. Last checked 2026-10-30. Source 1 · Source 2
Notes on this data
power_W_max is the power supply module rating (110 kW). Drives synchronous and asynchronous motors, with or without encoder, and linear motors.
Specify Motion is not affiliated with SEW-EURODRIVE GmbH & Co KG. SEW-EURODRIVE and MOVIDRIVE modular multi-axis servo inverter are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a SEW-EURODRIVE part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These series from our supply network is the closest match on published figures.
A dual-axis low-voltage Kinco drive for AGV differential-drive wheels, with RS + CANopen or RS + pulse variants and built-in brake output.
View series →Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
What a multi-axis servo drive is
A multi-axis servo drive controls two or more servo motors from one unit, usually sharing a power supply, DC bus and communication interface. Formats include compact two- to four-axis drives in one housing and modular systems with a common supply module and separate axis modules. Sharing the bus lets energy from a decelerating axis be used by others, reducing braking losses. Most connect to a motion controller or PLC over EtherCAT or another industrial Ethernet network.
When engineers choose a multi-axis servo drive
Choose a multi-axis drive for machines with several coordinated servo axes in one cabinet, such as robots, packaging machines and gantries. It saves space, wiring and cost per axis compared with single drives. The trade-offs are flexibility and fault isolation: axes share the supply, so a supply fault affects all axes, and replacing one module may need specific spare strategy. Mixing very different power levels can be limited by module ranges.
How to specify the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter
Send these with your enquiry and an engineer can confirm the right MOVIDRIVE modular multi-axis servo inverter variant or an equivalent:
- Number of axes and power per axis (A, kW)
- Supply voltage (V AC or DC)
- Network interface and cycle time
- Motor and feedback types
- Shared bus and regenerative energy handling
- Safety functions per axis
- Cabinet size and cooling
Common mistakes to avoid
- Sizing supply module for the sum of peaks without considering simultaneous demand
- Ignoring how one fault affects all axes
- Choosing modules without room for future axes
- Overlooking network cycle time with many axes
SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter: frequently asked questions
What is the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter?
Cabinet-mounted multi-axis system of supply modules (10 to 110 kW) with single-axis modules from 2 to 180 A and double-axis modules from 2 to 8 A, 250 % overload and built-in STO to PL e / SIL 3. Published series figures include power 110,000 W, continuous current 180 A. It is made by SEW-EURODRIVE GmbH & Co KG; Specify Motion can help source it or propose an equivalent.
Who makes the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter?
The SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter is made by SEW-EURODRIVE (SEW-EURODRIVE GmbH & Co KG) and is listed here for engineers comparing options. Specify Motion is not affiliated with SEW-EURODRIVE GmbH & Co KG; brand names are used only to identify the product.
What is the power of the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter?
The published series maximum power is 110,000 W. Individual models and sizes in the MOVIDRIVE modular multi-axis servo inverter range vary, so check the exact variant against your duty cycle, mounting and environment, or ask our engineers to confirm the right size for you.
Is there an alternative to the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter?
Yes. On published figures, Kinco FDS Two-in-One Low-Voltage DC Servo Drive (FDS-AB/CB/LB-D) is the closest match from our supply network. An engineer confirms the fit against your application before recommending anything.
What are the benefits of a shared DC bus?
On a shared DC bus, energy regenerated by a decelerating axis can be used by other axes that are accelerating, reducing the energy dissipated in braking resistors. It also reduces wiring and supply components. Sizing must consider simultaneous peak demand on the shared supply.
Are multi-axis drives cheaper than single-axis drives?
Typically, per axis, multi-axis drives cost less and take less cabinet space, because the supply, communication and housing are shared. The saving grows with the number of axes. For machines with only one or two axes, or widely separated axes, single drives can be simpler.
Further reading: How to select a multi axis servo drive · How to select a servo drive · Servo drives
Other multi-axis servo drive series
Spec builder
Specify what you need instead of MOVIDRIVE modular multi-axis servo inverter
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the SEW-EURODRIVE MOVIDRIVE modular multi-axis servo inverter: the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.