Motion controller
Yaskawa MP3300iec
IEC 61131-3 machine controller programmed in MotionWorks IEC that coordinates Yaskawa servo axes over MECHATROLINK-III.
Key specifications
| Fieldbus | MECHATROLINK-III, EtherNet/IP, Modbus TCP |
|---|---|
| Axes | 62 |
| Programming | IEC 61131-3 (MotionWorks IEC), PLCopen camming/gearing |
Summarised in our own words from Yaskawa Electric Corporation's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
Conflict: page overview says 4, 8 or 20 axes; its technical table lists 4/8/20/32/62. Max from table stored. CPU not stated.
Specify Motion is not affiliated with Yaskawa Electric Corporation. Yaskawa and MP3300iec are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Engineer support
Speak to our engineers about your project
Our experienced engineers are on hand, ready to help with your project. Whether you need the Yaskawa MP3300iec itself, help sourcing it, or a modified or custom design built around your load, speed and space, tell us what the machine has to do and we'll come back with the right option.
- Help sourcing MP3300iec and spares for installed machines
- Modified and custom designs when a catalogue part doesn't fit
- Complete axis: motor, drive, gearing and feedback matched together
Other motion controller series
Spec builder
Specify what you need instead of MP3300iec
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Our engineers are ready to help with your project
Tell us about your project and how you use the Yaskawa MP3300iec: the load, speed, duty and environment. An experienced engineer will review it and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.