Fibre optic rotary joints
Optical rotary joints that pass single- or multi-channel fibre signals across rotation.
Series compared
| Brand | Series | Circuits | Current | Speed | Bore / OD |
|---|---|---|---|---|---|
| Motion Control Products | FR Series Fiber Optic Rotary Joint | — | — | 2000 rpm | OD up to 67 mm |
| Motion Control Products | Fiber Optic Integrated Electrical Slip Ring | 70 | 30 A | 500 rpm | OD up to 600 mm |
| Moog | H18 / H24 | 24 | — | — | — |
| Moog | F 5408 | — | — | 1000 rpm | — |
| Moog | FO197 | — | — | 1000 rpm | — |
| Moog | FO197S | — | — | 100 rpm | — |
| Moog | FO206 | — | — | 1000 rpm | — |
| Moog | FO228 | — | — | 100 rpm | — |
| Moog | FO285 | — | — | 1000 rpm | — |
| Moog | FO286 | — | — | 1000 rpm | — |
| Moog | FO310 | — | — | 100 rpm | — |
| Moog | FO292 | — | — | 500 rpm | — |
| Moog | FO292RA | — | — | 500 rpm | — |
| Moog | FO291 | — | — | 100 rpm | — |
| Moog | FO190 | — | — | 100 rpm | — |
| Moog | FO300 (A/B/C) | — | — | 100 rpm | — |
| Moog | FO319 | — | — | 100 rpm | — |
| Moog | FO215 | — | — | — | — |
| Moog | FO242 | — | — | — | — |
| Moog | Single Channel Fiber Optic Rotary Joints | — | — | 1000 rpm | OD up to 38.1 mm |
Maximum figures across each series, summarised from manufacturers' published data on the date shown on each series page. Always confirm against the current datasheet.
Where fibre optic rotary joints are used
Spec builder
Configure fibre optic rotary joints
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Step 1 of 5
Engineer support
Let our experienced engineers do the hard work for you
Tell us what you need, whether it is this part, an equivalent or a complete axis built around it. An engineer will review your requirements and reply, normally within one working day.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.