Tubular linear motor
LinMot P01-48 (incl. P01-48 HP)
LinMot's largest 48 mm P01 tubular motor, giving over 1 kN peak on a 48/72 VDC supply. Stainless-steel versions are available for hygienic and wash-down use.
Key specifications
| Ingress protection | IP65 |
|---|---|
| Peak force (max) | 1,020 N |
| Continuous force (max) | 408 N |
| Stroke (max) | 1,840 mm |
| Linear speed (max) | 4.1 m/s |
Summarised in our own words from NTI AG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2 · Source 3 · Source 4 · Source 5
Notes on this data
1020 N peak (at 72 VDC, P01-48x360F-HP) and 408 N sustained (P01-48 HP) are from linmot.com. The x360F-HP datasheet gives 374 N continuous with fan cooling. Stroke sources disagree: linmot.com lists 1710 mm, the P01-48x240F datasheet 1830 mm, and the P01-48x150G-HP datasheet 1840 mm extended stroke (the value used). The 4.1 m/s speed is for P01-48x150G-HP at 72 VDC. IP65 is the standard motor rating; SSC stainless stators are listed as IP69K.
Specify Motion is not affiliated with NTI AG. LinMot and P01-48 (incl. P01-48 HP) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a LinMot part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Narrow, cost-effective iron-core linear motors with low cogging for long-stroke, space-constrained axes.
| Published maximum | P01-48 (incl. P01-48 HP) | AQM |
|---|---|---|
| Peak force | 1,020 N | 1,243 N meets or exceeds |
| Continuous force | 408 N | 506 N meets or exceeds |
| Speed | 4.1 m/s | 5 m/s meets or exceeds |
| Stroke | 1,840 mm | 100,000 mm meets or exceeds |
U-channel ironless linear motors with zero cogging, six sizes from 3 N to nearly 2 kN continuous, for fast settling precision stages.
| Published maximum | P01-48 (incl. P01-48 HP) | AUM |
|---|---|---|
| Peak force | 1,020 N | 16,200 N meets or exceeds |
| Continuous force | 408 N | 1,980 N meets or exceeds |
| Speed | 4.1 m/s | 5 m/s meets or exceeds |
| Stroke | 1,840 mm | — |
Vacuum-compatible ironless linear motors with high motor constant and zero cogging, six sizes.
| Published maximum | P01-48 (incl. P01-48 HP) | AWM |
|---|---|---|
| Peak force | 1,020 N | 3,845.3 N meets or exceeds |
| Continuous force | 408 N | 769.1 N meets or exceeds |
| Speed | 4.1 m/s | 5 m/s meets or exceeds |
| Stroke | 1,840 mm | — |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other tubular linear motor series
Spec builder
Specify what you need instead of P01-48 (incl. P01-48 HP)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the LinMot P01-48 (incl. P01-48 HP): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.