Linear motor drive
LinMot C1100 (C1100-GP / C1150)
A compact low-voltage DC servo drive for LinMot P0x linear and PR0x linear-rotary motors. It offers a range of fieldbus interfaces and optional Safe Torque Off.
Key specifications
| Ingress protection | IP20 |
|---|---|
| Supply | 72 VDC nominal (24–85 VDC) motor supply; 24 VDC logic |
| Fieldbus | CANopen, LinRS, EtherCAT, EtherCAT CoE (CiA 402), EtherCAT SoE, PROFINET |
| Axes | 1 |
Summarised in our own words from NTI AG's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1 · Source 2
Notes on this data
LinMot rates the drive '72 VDC / 25 A' (motor current 25 A on the product page) but does not say whether 25 A is continuous or peak, so the current fields are left null. The -1S variants add STO through relay contacts. The datasheet (Edition 24) is in German. Axes = 1 is taken from the single-axis description; the datasheet does not state an axis count. The eCatalog also lists an older 'C1100 (DISC)' series under earlier drives.
Specify Motion is not affiliated with NTI AG. LinMot and C1100 (C1100-GP / C1150) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with a LinMot part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 3 series from our supply network are the closest match on published figures.
Kinco drives for linear motors and direct-drive systems on 220 VAC, 3-11 Arms continuous, with pulse inputs up to 4 MHz or EtherCAT.
View DD2S Series Linear Motor Drivers →Leadshine's high-end 220 VAC servo drive from 400 W to 2 kW with 3.5 kHz bandwidth, STO SIL3, dual-encoder full closed-loop control and gantry synchronisation. EC models run EtherCAT; RS models offer Modbus RTU, pulse+direction and analogue.
| Published maximum | C1100 (C1100-GP / C1150) | EL8 Series AC Servo Drives (EL8-EC / E… |
|---|---|---|
| Continuous current | — | 12 A |
| Peak current | — | 36 A |
| Power | — | 2,000 W |
| Axes | 1 | 1 meets or exceeds |
Leadshine's EL7 platform spans 220 VAC drives from 400 W to 2 kW, 400 VAC drives to 7.5 kW and an 11-22 kW high-power range, all with STO and EtherCAT, Modbus/pulse or PROFINET variants.
| Published maximum | C1100 (C1100-GP / C1150) | EL7S / EL7 Series AC Servo Drives |
|---|---|---|
| Continuous current | — | 44 A |
| Peak current | — | 88 A |
| Power | — | 22,000 W |
| Axes | 1 | 1 meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other linear motor drive series
Spec builder
Specify what you need instead of C1100 (C1100-GP / C1150)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the LinMot C1100 (C1100-GP / C1150): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.