Stainless servo motor
Allen-Bradley Kinetix MPS Stainless-steel Servo Motors (MP-Series)
Stainless-steel MP-Series motor for high-pressure washdown, offering 230 V and 460 V windings and IP69K protection.
Key specifications
| Ingress protection | IP66, IP67 and IP69K (1200 psi washdown) |
|---|---|
| Peak torque | 11.1–27.1 Nm |
| Frame sizes | 100, 165 mm |
| Supply | 230 V and 460 V |
| Feedback | high-resolution feedback, absolute option |
Summarised in our own words from Rockwell Automation's published data; series maxima, individual models vary. Last checked 2026-10-29. Source 1
Notes on this data
Only peak torque range published on product page. Lifecycle not stated; no discontinuation notice found.
Specify Motion is not affiliated with Rockwell Automation. Allen-Bradley and Kinetix MPS Stainless-steel Servo Motors (MP-Series) are used only to identify the product. Comparisons use published figures; always confirm against the current datasheet.
Typical applications
Alternatives that meet or exceed these figures
Engineers often come to us with an Allen-Bradley part number and leave with an alternative that is easier to source, quicker to deliver or a better fit for the machine. These 2 series from our supply network are the closest match on published figures.
Kinco's current-generation AC servo motor line, matched to the JD2 and FD5P PRO drives. Small-inertia 40-80 mm frames run at 3000 rpm on 220 V; large-inertia 130 and 180 mm frames are 1500 rpm machines reaching 47.8 Nm rated and 7.5 kW, with 23-bit multi-turn absolute encoders as standard.
| Published maximum | Kinetix MPS Stainless-steel Servo Motors (MP-Series) | SMK Series AC Servo Motors (SMK40S/60S… |
|---|---|---|
| Rated torque | — | 47.8 Nm |
| Peak torque | 27.1 Nm | 119.5 Nm meets or exceeds |
| Speed | — | 6,000 rpm |
| Power | — | 7,500 W |
A complete AGV drive wheel combining servo motor, drive, reducer, brake and polyurethane tyre in one unit on 24-60 VDC with CANopen. Three published sizes (150, 165 and 180 mm wheels) give 3.6-40 Nm rated and up to 99 Nm peak at the wheel, for mobile robots carrying up to 1 tonne.
| Published maximum | Kinetix MPS Stainless-steel Servo Motors (MP-Series) | iWMC Integrated Servo Wheel |
|---|---|---|
| Rated torque | — | 40 Nm |
| Peak torque | 27.1 Nm | 99 Nm meets or exceeds |
Figures are the highest published for each series and are not always measured the same way. A higher figure is not automatically a better choice: mounting, duty cycle, feedback, connectors and approvals matter too. An engineer will check the fit against your application before recommending anything.
Other stainless servo motor series
Spec builder
Specify what you need instead of Kinetix MPS Stainless-steel Servo Motors (MP-Series)
Select every part you need, answer the questions an applications engineer would ask, and see your summary before we ask for any details.
- 1Products
- 2Performance
- 3Environment
- 4Volumes
- 5Your spec
Engineer support
Let our experienced engineers do the hard work for you
Tell us how you use the Allen-Bradley Kinetix MPS Stainless-steel Servo Motors (MP-Series): the load, speed, duty and environment. Our engineers will confirm whether it is still the right part, find it for you, or propose an alternative that fits better.
- Reviewed by an engineer, not an autoresponder
- Like-for-like and better-fit alternatives
- Standard, modified and custom options
Prefer to configure it? Use the spec builder.